端羟基聚丁二烯改性聚醚酯弹性体的合成与表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Synthesis and Characteristics of Multiblock Terpoly(Ester-Ether-Butadiene) Elastomers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以对苯二甲酸二甲酯(DMT)、1,4丁二醇(BD)、聚四氢呋喃醚(PTMG)和端羟基聚丁二烯(HTPB)为原料,采用熔融缩聚方法一步合成了一系列端羟基聚丁二烯改性的聚醚酯弹性体(PBT-co-PTMG/HTPB)。通过红外、核磁和凝胶色谱等分析方法对其分子结构和分子量进行了表征;测定了聚合物的热性能和物理力学性能。结果发现,随着PBT-co-PTMG/HTPB共聚物中端羟基聚丁二烯含量的增加,数均分子量逐渐增大,最高突破8万;玻璃化转变温度由-25℃降低到-65℃,耐低温性能得到明显改善;共聚物力学性能测试结果表明,当HTPB的质量分数在10%以下时,其强度和断裂伸长率随着HTPB含量的增加而变大,但是质量分数超过10%以后,材料的强度和断裂伸长率随其含量的增加而变小。

    Abstract:

    Terpoly (ester-ether-butadiene) (PBT-co-PTMG/HTPB) was prepared by melt poly-condensation with dimethyl terephthalate (DMT), l, 4-butandiol (BD), poly(tetramethylene-oxide glycol) (PTMG) and hydroxyl terminated polybutadiene (HTPB). The chemical structure and molecular weight of the polymers were presented by FT-IR, 1H-NMR and GPC. The thermal properties and the physical and mechanical properties were measured. The results show that molecular weights of PBT-co-PTMG/HTPB increase with the content of HTPB increasing, and the maximum molecular weight is more than 8 million. The glass transition temperature moves from -25 ℃ down to -65 ℃ due to HTPB units in the soft segments. It represents the nice resistance to low temperature. Both the tensile strength and elongation at break increase with the content of HTPB when the mass fraction of HTPB is below 10%, but decrease while the mass fraction of HTPB concentration is higher than 10% in PBT-co-PTMG/HTPB.

    参考文献
    相似文献
    引证文献
引用本文

宋传江,彭 军,张英伟,王文志,黄自华.端羟基聚丁二烯改性聚醚酯弹性体的合成与表征[J].高分子材料科学与工程,2013,29(7):21-24. Chuanjiang Song, Jun Peng, Yingwei Zhang, Wenzhi Wang, Zihua Huang. Synthesis and Characteristics of Multiblock Terpoly(Ester-Ether-Butadiene) Elastomers[J]. Polymer Materials Science & Engineering,2013,29(7):21-24.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司