有机锡催化熔融酯交换法合成聚碳酸酯型脂肪族聚氨酯
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Synthesis of Polycarbonate Polyurethane Through a Solvent-Free and Nonisocyanate Melt Transurethane Process Catalyzed by Organic Tin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究了以1,6-六亚甲基二氨基甲酸甲酯(HDU)和聚碳酸酯二醇(PCDL)为原料,有机锡为催化剂,无溶剂熔融酯交换缩聚合成聚氨酯(PU)的新工艺。其催化剂用量,缩聚反应温度,缩聚反应时间,原料配比等工艺条件对产品的分子量等有较大的影响。在原料物质的量比n(PCDL):n(HDU)=1∶0.99,以二丁基氧化锡(DBTO)为催化剂,用量为m(DBTO)∶m(HDU+PCDL)=0.125∶100,100℃预聚1h,185℃真空缩聚4h等较优的工艺条件下,可以得到分子量较高、硬度较大、白度较好的PU 原产品。

    Abstract:

    Using 1,6-six methylene diamino methyl formate (HDU) and polycarbonate glycol (PCDL) as raw materials, organic tin as catalyst, a melt transurethane polycondensation route for polyurethanes(PU) under solvent free and nonisocyanate condition was developed. The process parameters including the catalyst dosage, polycondensation temperature, polycondensation reaction time, the ratio of raw materials had great influence on the molecular weight of products. Under the following optimum conditions: DIBUTYLTIN oxide (DBTO) as catalyst, catalyst dosage of m(DBTO)∶m(HDU+PCPL)=0.125∶100, the molar ratio of HDC and PCDL (n(PCDL)∶n(HDC)) of 1∶0.99, prepolymerizing under 100 ℃ for 1 h, high vacuum polymerization under 185 ℃ for 4 h, original PU can be obtained with high molecular weight, good hardness and good white degree.

    参考文献
    相似文献
    引证文献
引用本文

潘冬冬,田恒水,王晓蕾.有机锡催化熔融酯交换法合成聚碳酸酯型脂肪族聚氨酯[J].高分子材料科学与工程,2013,29(7):25-29. Dongdong Pan, Hengshui Tian, Xiaolei Wang. Synthesis of Polycarbonate Polyurethane Through a Solvent-Free and Nonisocyanate Melt Transurethane Process Catalyzed by Organic Tin[J]. Polymer Materials Science & Engineering,2013,29(7):25-29.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司