PMMA/SAN/MBS共混物的结构与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(20964001);贵州省省长基金(黔省专合字[2009]77号)


StructrueandPropertiesofPMMA/SAN/MBSBlends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过熔融共混法制备了聚甲基丙烯酸甲酯/聚(苯乙烯-丙烯腈)/甲基丙烯酸甲酯-丁二烯-苯乙烯聚合物(PMMA/SAN/MBS)共混物。对共混物进行了力学性能测试,结果表明,MBS的加入显著提高了共混物的冲击韧性,PMMA 与SAN 的配比对其冲击韧性影响不大;采用光电雾度仪和透射电镜(TEM)对共混物的光学性能和结构进行了表征,结果表明,PMMA/SAN/MBS共混物的透光率随MBS含量的增加而降低;PMMA/SAN 的质量比为50/50时,MBS含量对共混物透光率的影响最小;TEM 结果表明,MBS在基体中分散均匀;用光学显微镜等手段对共混物耐刮擦行为进行了研究,结果表明,MBS的加入在一定程度上降低了共混物的耐刮擦性能。

    Abstract:

    In this paper, PMMA/styrene-acrylonitrile copolymer (SAN)/ methylmethacrylate-butadiene styrene (MBS) blends were prepared via melt-mixing technology. The mechanical properties test reveals that a remarkable upgrade in the impact toughness of the blends appears with increase of MBS content. The ratio of PMMA and SAN has not much influence on the impact toughness. The optical properties and the structure of the blends were characterized respectively with optical haze instrument and transmission electron microscope (TEM). The results show that the transmittance of the blends decreases with the increase of MBS; when the content of MBS contains at a certain value, the optical properties reach the best level with the mass ratio of PMMA and SAN of 50/50. The result of TEM claims a relatively uniform dispersion of MBS particles in matrix polymer. The scratch resistant properties were investigated by microscope. To some extent,the addition of MBS reduces the scratch resistant properties.

    参考文献
    相似文献
    引证文献
引用本文

宋亚平,秦舒浩,于 杰,何 敏. PMMA/SAN/MBS共混物的结构与性能[J].高分子材料科学与工程,2013,29(7):84-89. Yaping Song, Shuhao Qin, Jie Yu, Min He. StructrueandPropertiesofPMMA/SAN/MBSBlends[J]. Polymer Materials Science & Engineering,2013,29(7):84-89.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司