炭黑表面修饰对填料网络化的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(50903030,11226108)


Effect of Surface Modification of Carbon Black on Filler Networking
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    炭黑加入到橡胶后会导致橡胶动态粘弹性发生很大变化,填料网络化是决定填充橡胶动态滞后的主要原因,文中采用含有吡啶官能团的分子对炭黑N330进行表面修饰,以控制炭黑填充橡胶的动态粘弹行为。结果发现,炭黑表面经过修饰后,增大了炭黑聚集体在橡胶中的平均距离,并使炭黑的网络化程度得到控制。通过对两种炭黑填充橡胶相对模量的研究,发现在动态应变的作用下,改性炭黑(GCB)之间的填料网络更容易受到破坏。说明炭黑经过表面修饰后,其表面能降低,炭黑粒子之间的相互作用减弱。

    Abstract:

    The main factor to determine the dynamic hysteresis is filler networking. In this paper, carbon black (N330) was modified by special molecular containing pyridine function to control the dynamic viscoelastic behavior of filled rubbers. The results show that the average distance between carbon black aggregates increases after the surface modification of carbon black and the filler networking was controlled. The filler network of the modified carbon black during dynamic strain is easier to be damaged through the study of the relative modulus. It is proved that after surface modification of carbon black, the surface energy is reduced and the interaction between carbon black particles is weakened.

    参考文献
    相似文献
    引证文献
引用本文

张艳丹,张俊丽,韩晶杰,吴驰飞.炭黑表面修饰对填料网络化的影响[J].高分子材料科学与工程,2013,29(7):98-100. Yandan Zhang, Junli Zhang, Jingjie Han, Chifei Wu. Effect of Surface Modification of Carbon Black on Filler Networking[J]. Polymer Materials Science & Engineering,2013,29(7):98-100.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司