无机粒子对聚醚型聚氨酯微相分离的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(50273025)


The Effect of Inorganic Particles on Microphase Separation of Polyether Polyurethanes
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过动态力学分析测试手段,考察了不同表面性质的无机粒子对聚四亚甲基醚二醇,2,4-甲苯二异氰酸酯,二甲硫基甲苯二胺(PTMG-TDI-E-300)组成体系的聚醚型聚氨酯(PU)微相分离的影响,并与力学性能进行关联。结果表明,在聚氨酯中加入不同的无机粒子,可以提高材料微相分离的程度,材料的耐撕裂性能明显提高。比较PU/SiO2、PU/CNTs和PU/13X分子筛的几种复合材料,以多壁碳纳米管(CNTs)对聚氨酯软硬链段的微相分离影响最大,在以tanδ-T曲线为基准时,与纯PU 相比,其玻璃化转变温度下降了17.18℃。

    Abstract:

    Polyurethanes(PUs) developed from polytetramethylene glycol (PTMG), toluene 2,4-diisocyanate (TDI-100),3,5-dimethyl mercapto toluenediamine (E-300) and different inorganic particles were prepared by prepolymerization method. Dynamic mechanical analysis(DMA) was used to investigate the effects of inorganic particles on microphase separation and its relationship with mechanical properties. The results show that adding inorganic particles in PUs can enhance microphase separation and significantly improve tear resistance performances. Besides, among PU/SiO2,PU/CNTs and PU/zeolite molecular sieve 13X composites, carbon nanotubes(CNTs) represents the greatest effect on the microphase separation between hard and soft segments of PU. And the glass transition temperature (Tg) of soft segments (obtained from tanδ-T curve) in PU/CNTs composites decreases by 17.18 ℃ compared to that of pure PU.

    参考文献
    相似文献
    引证文献
引用本文

余 翔,吕志平,佟玉超,杨茹果.无机粒子对聚醚型聚氨酯微相分离的影响[J].高分子材料科学与工程,2013,29(7):101-105. Xiang Yu, Zhiping Lv, Yuchao Tong, Ruguo Yang. The Effect of Inorganic Particles on Microphase Separation of Polyether Polyurethanes[J]. Polymer Materials Science & Engineering,2013,29(7):101-105.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司