微型塑料双联齿轮的超声波焊接工艺
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51175348);深圳市模具先进制造技术重点实验室开放基金项目(M201301)


Implementing Ultrasonic Technics of Weld Micro Plastic Dual Gear
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用飞秒激光切割结合微细电阻滑焊制备三维金属微双联直齿轮模腔:在厚度为20μm 的0Cr18Ni9不锈钢箔上,在230mW 的飞秒激光功率、50μm/s的切割速度和1.5μm 的切割补偿量下获得二维微结构;之后在0.22V 的焊接电压,20N的焊接力和10ms的放电时间下,利用微细电阻滑焊对多层二维微结构进行热扩散焊接叠加拟合而成具有曲面特征的微型腔。将平均粒径100μm 的乙烯-醋酸乙烯共聚物(EVA)塑料粉末充填入微双联齿轮型腔,在超声波塑料焊接机上设定不同的工艺参数进行成型实验表明,焊接压强为0.2MPa,焊接时间为2.5s,保压时间为0.2s,熔体能快速填充模腔,得到表观形状复制率较好的微塑件。

    Abstract:

    The preparation technics of 3D metal micro dual gear cavity by femtosecond (FS) laser and electric resistance slip welder was introduced. 0Cr18Ni9 stainless steel foils (20 μm thick) was taken as the base and welded by 230mW FS laser at a speed of 50 μm/s, a compensation rate of 1.5 μm to prepare a 2D structure. Then, the structure was repeatedly overlaid and fitted with resistance slip welder (welding voltage of 0.22V, welding force of 20N, welding time of 10 ms) to prepare a cavity with free form surface. Finally, the cavity was filled with ethylene vinyl acetate (EVA) powder (particle size of 100 μm) to forms a micro gear part with good apparent replicability under the conditions, such as the welding pressure 0.2MPa, the welding time 2.5s and the holding time 0.2s.

    参考文献
    相似文献
    引证文献
引用本文

梁 雄,伍晓宇,李 兵,王亚涛,凌世全,罗 烽,杜晨林,阮双琛.微型塑料双联齿轮的超声波焊接工艺[J].高分子材料科学与工程,2013,29(7):114-117. Xiong Liang, Xiaoyu Wu, Bin Li, Yatao Wang, Shiquan Lin, Feng Luo, Chenlin Du, Shuangchen Ruan. Implementing Ultrasonic Technics of Weld Micro Plastic Dual Gear[J]. Polymer Materials Science & Engineering,2013,29(7):114-117.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司