静电纺丝制备聚羟基脂肪酸酯纳米纤维及其直径预测模型
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

天津市自然科学基金(11JCYBJC02500)


Preparation of Polyhydroxyburyrate Nanofiber by Electrospinning and Prediction Model of Diameter
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以生物可降解材料聚羟基丁酸酯(PHB)为原料,采用静电纺丝技术制备了PHB纳米纤维,利用扫描电子显微镜观察纤维形态,研究静电纺丝参数对纳米纤维直径的影响。在响应面法的Box-Behnken设计的基础上对PHB静电纺丝纤维直径进行预测,通过回归分析建立二次多元模型。结果表明,PHB溶液浓度、挤出率和浓度二次项对纤维的影响最为显著,其次是毛细管直径和毛细管直径的二次项。模型预测的纤维直径与真实值差异不显著,说明回归模型拟合情况良好,可以有效地预测静电纺PHB纤维的直径。

    Abstract:

    Polyhydroxyburyrate (PHB) nanofiber was fabricated by electrospinning technology. The morphology of the PHB nanofiber was investigated by scanning electron microscopy (SEM). A response surface methodology (RSM) was applied to analyze the effect of electrospinning parameters on the diameter of PHB nanofiber. The Box-Benkhen experimental design (BBD) technique was used to predict the diameter of electrospun PHB nanofiber. The multiple regression model was set up by regression analysis. The results show that the concentration, infusion rate and square of concentration have the most significant influence on the diameter of the nanofiber. The second important parameters are nozzle diameter and square of nozzle diameter. There are no obvious differences between the actual values and predicted values from regression equation, which means good reliability of the model.

    参考文献
    相似文献
    引证文献
引用本文

侯成伟,蔡志江.静电纺丝制备聚羟基脂肪酸酯纳米纤维及其直径预测模型[J].高分子材料科学与工程,2013,29(7):118-122. Chengwei Hou, Zhijiang Cai. Preparation of Polyhydroxyburyrate Nanofiber by Electrospinning and Prediction Model of Diameter[J]. Polymer Materials Science & Engineering,2013,29(7):118-122.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司