链转移剂单体α-甲基丙烯酸-3-巯基己酯对支化聚苯乙烯悬浮聚合的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21174020);常州市高分子材料重点实验室和江苏省优势学科资助项目


Synthesis of Branched Polystyrene via Suspension Polymerization in the Presence of Chain Transfer Monomer 3-Mercapto-Hexyl Methacrylate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以α-甲基丙烯酸-3-巯基己酯(MHM)为链转移剂单体,偶氮二异丁腈(AIBN)为引发剂,采用悬浮聚合方法合成支化聚苯乙烯。考察了MHM 和AIBN 浓度对聚合反应的影响;采用核磁共振氢谱(1H-NMR)、三检测体积排除色谱(TD-SEC)和旋转流变仪对支化聚苯乙烯进行了表征分析。结果表明,当物质的量比n(AIBN)/n(MHM)>1时,可以避免交联制备相对分子质量分布相对较窄的高相对分子质量支化聚苯乙烯(Mw.MALLS=1.03×106 g/mol,PDI=7.76),其Zimm 相对支化因子g′为0.51,表现出较高的支化程度;与同相对分子质量的线性聚合物相比较,合成的支化聚合物表现出很低的聚合物熔体黏度,同时未表现出明显的剪切变稀行为。

    Abstract:

    Branched polystyrene was prepared through suspension polymerization using 3-mercapto-hexyl methacrylate (MHM) as the chain transfer monomer and 2,2′-Azobisisobutyronitrile (AIBN) as the initiator. The influence of MHM and AIBN concentration on polymerization was studied. The branched polystyrene was characterized by proton nuclear magnetic resonance (1H-NMR), triple detection size exclusion chromatography (TD-SEC) and rotational rheometer. It was essential that the molar ratio of n(AIBN)/n(MHM) must be larger than 1.0 for soluble branched polymers. The branched polystyrene prepared by suspension polymerization shows higher branched degree (the average Zimm branched factor g′= 0.51), high molecular weight and narrow molecular weight distribution (Mw.MALLS=1.03×106 g/mol, PDI=7.76). Compared with linear polymers, branched polymers exhibit lower melt viscosity without obvious shear thinning behavior.

    参考文献
    相似文献
    引证文献
引用本文

郭金龙,黄文艳,张 俊,薛小强,杨宏军,蒋必彪.链转移剂单体α-甲基丙烯酸-3-巯基己酯对支化聚苯乙烯悬浮聚合的影响[J].高分子材料科学与工程,2013,29(8):93-96. Jinlong Guo, Wenyan Huang, Jun Zhang, Xiaoqiang Xue, Hongjun Yang, Bibiao Jiang. Synthesis of Branched Polystyrene via Suspension Polymerization in the Presence of Chain Transfer Monomer 3-Mercapto-Hexyl Methacrylate[J]. Polymer Materials Science & Engineering,2013,29(8):93-96.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司