超声波在线检测高分子材料在流变仪中的挤出行为(I)
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

四川省应用基础项目(2010JY0123);四川省教育厅青年项目(10ZB006)


Real-Time Diagnosis of Polymer Extruding Behaviour During Rheometer Processing(I)
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    把超声波检测系统和流变仪操作系统相结合,使用狭缝口模,同时采用温度和压力传感器等,考察在线加工条件下超声波信号与高分子材料结构之间的对应关系。研究发现,超声波参数(速度和衰减)随着聚合物熔体在平板流变仪中受到的剪切力的变化而变化,这种变化能应用于在线检测聚合物熔体粘度和松弛结构的变化。通过改变加工条件,发现超声波与聚合物熔体以及加工条件有一一对应的指纹关系,超声波的这一特点可以用于在线检测聚合物在加工过程中结构的变化,而压力和温度传感器则不能。

    Abstract:

    Ultrasonic, temperature and pressure sensors were combined together and used in slit rheometer to in line investigate the relationship between ultrasound signals and structure of polymer during melting processing. It is found that ultrasonic parameters such as velocity and attenuation, vary with the changes of the polymer structure in the slit rheometer under the shearing force, which can in-line characterize the changes of the polymer melt viscosity and the relaxation of polymer chains. Ultrasonic signals have monotone changes with different polymers under different processing conditions, which can be called fingerprint effects. The fingerprint effect can be employed to in line monitor the composition change during the processing, while the pressure and the temperature sensors cannot be.

    参考文献
    相似文献
    引证文献
引用本文

赵丽娟, 许 琪, 姚燕青, 郭少云.超声波在线检测高分子材料在流变仪中的挤出行为(I)[J].高分子材料科学与工程,2013,29(8):146-149. Lijuan Zhao, Qi Xu, Yanqing Yao, Shaoyun Guo. Real-Time Diagnosis of Polymer Extruding Behaviour During Rheometer Processing(I)[J]. Polymer Materials Science & Engineering,2013,29(8):146-149.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司