含GMA 的丙烯酸酯类胶粘剂的自由基-阳离子混杂光固化
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Free Radical-Cationic Hybrid UV Curing Process of Acrylate Adhesives Containing Glycidylmethacrylate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    对含有甲基丙烯酸缩水甘油酯(GMA)的丙烯酸酯类光固化胶粘剂分别进行自由基光固化和自由基/阳离子混杂光固化,利用红外光谱研究了GMA含量和阳离子光引发剂对光固化过程和胶粘剂粘接性能的影响。红外光谱结果表明,GMA的双键聚合速度大于芳香族聚氨酯二丙烯酸酯(6201)和丙烯酸异冰片酯(IBOA),GMA与6201的共聚倾向大于IBOA与6201的共聚倾向。阳离子光引发剂的加入会加大固化体系中的自由基浓度,导致固化体系的凝胶率降低。GMA在与IBOA形成的混合体系中的物质的量分数≤70%时,混杂光固化胶粘剂的剪切强度随着GMA 含量的增加而增加。

    Abstract:

    Acrylate adhesives containing glycidylmethacrylate(GMA) were cured via free radical cure or free radical/cationic hybrid cure respectively. The influence of the content of GMA and cationic UV-curing initiator in UV curing process and the resulting adhesive properties were studied by means of infrared(IR) spectroscopy. It is show that double bonds in GMA react faster than aromatic polyurethane diacrylate(6201) and isobornyl acrylate(IBOA), and GMA tends to copolymerize with 6201 more likely than IBOA with 6201. As a result of cationic UV-initiation reaction, the radical concentration increases, leading to decreased gel ratio in cured products. Lap shear strength of hybrid UV curing adhesives improves with the addition of GMA when molar fraction of GMA in the mixture of IBOA and GMA) is not more than 70%.

    参考文献
    相似文献
    引证文献
引用本文

孙龙生,杨继萍,黄鹏程,路明昌.含GMA 的丙烯酸酯类胶粘剂的自由基-阳离子混杂光固化[J].高分子材料科学与工程,2013,29(9):23-27. Longsheng Sun, Jiping Yang, Pengcheng Huang, Mingchang Lu. Free Radical-Cationic Hybrid UV Curing Process of Acrylate Adhesives Containing Glycidylmethacrylate[J]. Polymer Materials Science & Engineering,2013,29(9):23-27.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司