超高分子量聚乙烯的熔融缺陷
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Fusion Defects of Ultrahigh Molecular Weight Polyethylene
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对超高分子量聚乙烯(UHMWPE)成型加工中存在的熔融缺陷问题,通过在不同加工条件下对超高分子量聚乙烯进行模压成型,研究熔融缺陷的形成及对制品力学性能的影响。采用对制品进行扫描电镜(SEM)断面形貌观察、力学拉伸和差示扫描量热(DSC)测试,结果发现,延长加工时间或提高加工温度,UHMWPE的结晶行为无明显变化,但都能够有效地改善超高分子量聚乙烯的熔融缺陷,能提高制品的断裂强度和断裂韧性等力学性能。

    Abstract:

    In view of the melt defects of the products formed in the melt processing, ultra-high molecular weight polyethylene (UHMWPE) was molded under different processing conditions. The formation of melt defect and its effect on the mechanical behavior of the products were investigated. Through SEM morphology, mechanical tensile test and DSC test, the results show that by processing time and the processing temperature increasing, the crystallization behavior of ultrahigh molecular weight polyethylene has not been obviously changed,but the fusion defects of ultrahigh molecular weight polyethylene can be effectively reduced. The tensile strength at break and fracture toughness of the product are improved.

    参考文献
    相似文献
    引证文献
引用本文

王 飞,陈金耀,曹 亚.超高分子量聚乙烯的熔融缺陷[J].高分子材料科学与工程,2013,29(9):40-42. Fei Wang, Jinyao Chen, Ya Cao. Fusion Defects of Ultrahigh Molecular Weight Polyethylene[J]. Polymer Materials Science & Engineering,2013,29(9):40-42.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司