耐高温双马来酰亚胺树脂体系的流变性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

总装预研项目


Rheological Behaviors of the High Temperature Resistant Bismaleimide Resin System
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在差示扫描量热分析(DSC)与基本黏度测量实验的基础上,对传递模塑工艺(RTM)成型用双马来酰亚胺树脂体系的化学流变性能与基本工艺性能进行了研究。通过对不同配方树脂体系进行动态及等温黏度测量,得到了相应的动态、静态特性曲线,对曲线进行分析并根据双阿伦尼乌斯方程,建立了体系的流变模型,利用流变模型对实验结果进行了模拟验证。验证结果表明,建立的流变模型与测试实验结果能够很好地吻合,并能模拟不同条件下的流变行为。利用该模型能预报RTM 成型工艺窗口,为优化RTM 成型工艺参数,保证制件质量提供了理论依据和参考数据。

    Abstract:

    The rheological behavior of bismaleimide resin for resin transfer molding (RTM) was studied by DSC analysis and the viscosity experiment. A series of rheological models were got and the dual Arrhenius equation was established, which was used to simulate the rheological behavior of the resin systems. The model predictions determined from the dual Arrhenius equation were in good agreement with the experimental data. The processing window of the resin systems can be well determined based on the rheological models. The rheological models are important for processing simulation and quality control of RTM processing for high performance composites.

    参考文献
    相似文献
    引证文献
引用本文

王芳芳, 张彦飞, 杜瑞奎, 刘亚青, 赵贵哲.耐高温双马来酰亚胺树脂体系的流变性能[J].高分子材料科学与工程,2013,29(9):53-57. Fangfang Wang, Yanfei Zhang, Ruikui Du, Yaqing Liu, Guizhe Zhao. Rheological Behaviors of the High Temperature Resistant Bismaleimide Resin System[J]. Polymer Materials Science & Engineering,2013,29(9):53-57.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司