制备方法对聚氨酯材料性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(50273025)


Preparation and Characterization of Polyurethane by Different Preparation Method
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用聚酯多元醇(PEA)和聚醚多元醇(PTMG)为混合软链段,考察了相同原料组成而不同制备方法对聚氨酯材料力学性能及动态行为的影响。方法一:将PEA和PTMG混合后制成预聚体,用扩链剂(MOCA)扩链后合成聚氨酯;方法二:将PEA和PTMG分别制成备预聚体,按照一定比例取出2种预聚体,再按各自的扩链系数加入MOCA,反应数分钟后将两者混合制备PEA/PTMG混合软链段聚氨酯。动态力学分析表明,不同制备方法对材料的耗能模量及玻璃化转变温度有较大影响,也证实了按照方法二制备的聚氨酯具有多微区结构。论文的研究模式对制备多种不同微区共存的聚氨酯是有益的。

    Abstract:

    Using polytetramethylene glycol (PTMG) and polyethylene glycol adipate (PEA) as mixed soft segments, polyurethanes(PUs)were designed by different preparation methods. Dynamic mechanical analysis(DMA) was used to investigate the micro-phase separation of PUs. One method was that the prepolymer was prepared with the mixed polyols containing PEA and PTMG with some ratio, then 4,4′-methylene-2-ortho-dichloroaniline(MOCA) was used as the chain extender, PUs were obtained. The second method was that the two kinds of prepolymers were prepared with PEA and PTMG respectively. MOCA was used to extend the two pre-polymers. After reacted for 3 min~6 min, the two parts were incorporated and molded to prepare PUs. The DMA test results show that loss modulus and glass transition temperature of PU are influenced by the preparation method to a large extent. The micro-structure of PUs can be influenced by preparation method.

    参考文献
    相似文献
    引证文献
引用本文

佟玉超, 吕志平, 郭秀鹏, 余 翔, 张 鑫, 吴 冉.制备方法对聚氨酯材料性能的影响[J].高分子材料科学与工程,2013,29(9):58-61. Yuchao Tong, ZhipingLv, Xiupeng Guo, Xiang Yu, XinZ hang, Ran Wu. Preparation and Characterization of Polyurethane by Different Preparation Method[J]. Polymer Materials Science & Engineering,2013,29(9):58-61.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司