聚1-丁烯釜内合金的流变性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家科技支撑计划项目(2011BAE26B05);山东省自然科学杰出青年基金(JQ201213)


Melts Rheological Behaviors of Poly(1-Butene) Alloy Within Reactor
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用恒速双筒毛细管流变仪研究了聚1-丁烯釜内合金的流变性能并将其与高全同聚1-丁烯(iPB)的流变性能进行了比较。结果表明,所合成的釜内合金熔体是一种假塑性流体,且随着测试温度的升高其非牛顿指数变大,非牛顿性减小。在相同温度和剪切速率下,釜内合金的粘流活化能小于iPB的粘流活化能;随剪切速率的升高,粘流活化能减小,其粘温敏感性降低。

    Abstract:

    The rheological properties of poly(1-butene) alloy within reactor were studied by double capillary rheometer. The results show that the alloy within reactor is a kind of pseudoplastic fluid with the non-Newtonian index less than 1. Its non-Newtonian index becomes larger with the temperature increasing. ηa of alloy within reactor decreases from 320 Pa·s to 83 Pa·s while the temperature increases from 160 ℃ to 200 ℃ under γ of 1000 s-1. The activation energy of the alloy within reactor is smaller than that of iPB at the same temperature. The activation energy decreases with the increase of sharing rate, which means that the temperature dependence of the viscosity decreases. With shearing rate increasing, the elastic energy storage increases. The entrance pressure decreases with the temperature, implying that the morphology stability of alloy-A is better.

    参考文献
    相似文献
    引证文献
引用本文

邵华锋, 张伟, 王召栋, 姚薇, 贺爱华, 黄宝琛.聚1-丁烯釜内合金的流变性能[J].高分子材料科学与工程,2013,29(9):91-93. Huafeng Shao, Wei Zhang, Zhaodong Wang, Wei Yao, Aihua He, Baochen Huang. Melts Rheological Behaviors of Poly(1-Butene) Alloy Within Reactor[J]. Polymer Materials Science & Engineering,2013,29(9):91-93.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司