改性大麻纤维/不饱和聚酯复合材料的力学性能及界面表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(31070495);教育部留学回国人员启动基金(jyblxjj03);福建省自然科学基金资助(2011J01282)


Mechanical Properties and Interface Characterization of Modified-Hemp-Fiber Reinforced Unsaturated Polyester Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用模压成型方法制备大麻纤维/不饱和聚酯复合材料,用六亚甲基二异氰酸酯(DIH)与丙烯酸羟乙酯(HEA)对纤维进行表面处理。结果表明,纤维改性后复合材料的拉伸强度、弯曲强度及弯曲模量均有显著提高;当DIH-HEA 用量为纤维干质量的3%时,复合材料的总体力学性能最佳。复合材料拉伸断面扫描电镜(SEM)显示,纤维表面处理改善了纤维与树脂间的界面结合。改性纤维的红外光谱(FT-IR)和X射线光电子能谱(XPS)分析表明,DIH-HEA 混合物与纤维表面羟基产生共价键结合。

    Abstract:

    Hemp fibers reinforced unsaturated polyester(UPE) composites were prepared by compression moulding. Hemp fibers were treated with 1,6-diisocyanatohexane (DIH) and 2-hydroxyethyl acrylate (HEA). The results indicate that the tensile strength, flexural strength and flexural modulus of the fibers modified composites increase. When the dosage of DIH-HEA is 3% of the dry mass of the fiber, the tensile strength, flexural strength and flexural modulus of the reinforced composites are the best. SEM photos of the fractured surface of hemp/UPE composites reveal that treatment of hemp fibers with the combination of DIH and HEA greatly improves the interfacial adhesion between hemp fibers and UPE resins. FT-IR and XPS analysis of treated fibers indicate that DIH and HEA are covalently bonded to hemp fibers.

    参考文献
    相似文献
    引证文献
引用本文

陈婷婷,刘文地,邱仁辉,温晓芸.改性大麻纤维/不饱和聚酯复合材料的力学性能及界面表征[J].高分子材料科学与工程,2013,29(9):94-97. Tingting Chen, Wendi Liu, Renhui Qiu, Xiaoyun Wen. Mechanical Properties and Interface Characterization of Modified-Hemp-Fiber Reinforced Unsaturated Polyester Composites[J]. Polymer Materials Science & Engineering,2013,29(9):94-97.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司