气辅共挤出界面位置对挤出胀大的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51163011);高等学校博士学科点专项科研基金(20093601110001);赣鄱英才555工程领军人物培养计划项目资助


Influence of Interface Position on Die Swell in Gas-Assisted Co-Extrusion Molding Processes
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于聚合物流变学理论,运用有限元方法,建立了半圆形共挤口模成型的理论模型,并对理论模型进行了数值模拟,研究了口模入口端熔体层间界面位置及熔体入口流率对共挤出胀大和熔体层间界面位置的影响。研究表明,气辅共挤过程中,当两熔体流率相等时,使得两熔体入口面积近似相等的r 值(共挤口模入口处界面位置)能将熔体的离模膨胀率降为零值,同时保证熔体层间界面位置稳定;当两熔体流率不等时,熔体离模膨胀率随着自身流率的增大而增大,随着另一熔体流率的增大而减小,界面位置则向流率较低的一侧偏移。

    Abstract:

    Based on numerical simulation and experiment research of isothermal theoretical model, the non-isothermal mathematical model of the half-club multilayer co-extrusion was established by the finite element method. The influence of original interface position and the flow rate on die swell and interface position in gas-assisted co-extrusion molding processes was investigated. The results show that the die swell ratio and interface instability are both relevant to r value(i.e. the interface position at the die entrance) and the flow rate. The die swell ratio is zero and the interface position is uniform when r value makes the two melts entrance area and the flow rate equal. If the flow rate is unequal, die swell of melts is proportional to the flow rate of itself and is in inverse proportional to the flow rate of the other one. The interface position moves towards the melt of lower flow rate.

    参考文献
    相似文献
    引证文献
引用本文

邓小珍,柳和生,黄益宾,黄兴元,李孟山.气辅共挤出界面位置对挤出胀大的影响[J].高分子材料科学与工程,2013,29(9):114-118. Xiaozhen Deng, Hesheng Liu, Yibin Huang, Xingyuan Huang, Mengshan Li. Influence of Interface Position on Die Swell in Gas-Assisted Co-Extrusion Molding Processes[J]. Polymer Materials Science & Engineering,2013,29(9):114-118.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司