汽车后灯配光镜的内应力缺陷实验
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Residual Stress Experiments on Defects of Automobile Taillight Lenses
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    汽车后灯配光镜是采用聚甲基丙烯酸甲酯(PMMA)材料二次注塑成型。当事先成型好的塑件作为嵌件放入模具中二次注塑后,最终制品内会产生较大的内应力,给使用带来不便。为消除二次注塑成型制品中内应力缺陷,文中通过对2种不同内应力状态的产品进行溶剂浸渍实验研究,得到不同的结果。通过采用远红回火炉对产品回火处理后,塑件内应力可大幅度降低。文中还对塑件应力形成和消除作了阐述。研究表明,合理选择汽车后灯配光镜的回火方法和工艺条件,能保证制品后处理后达到预期效果并满足功能性需要。

    Abstract:

    Automobile taillight lenses are made of two kinds of injection molding polymethylmethacrylate(PMMA) material. When prior forming plastic parts were inserted into the secondary injection mould, greater stress in products would be caused to bring inconvenience for final use. In order to eliminate residual stress of defects in the two injection molding products, two kinds of stress state products were studied by solvent impregnated experiments. Through tempering treatment of far red tempering furnace, the internal stress of plastic parts can be greatly reduced. The formation and elimination mechanism of plastic parts stress were expounded. The results show that it is necessary to choose reasonable tempering method and process conditions for automobile taillight lenses, in order to guarantee the products after processing to achieve the desired results and meet the functional needs.

    参考文献
    相似文献
    引证文献
引用本文

陶永亮,谢鹏程.汽车后灯配光镜的内应力缺陷实验[J].高分子材料科学与工程,2013,29(9):123-127. Yongliang Tao, Pengcheng Xie. Residual Stress Experiments on Defects of Automobile Taillight Lenses[J]. Polymer Materials Science & Engineering,2013,29(9):123-127.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司