微纳尺寸核壳橡胶粒子增韧聚苯乙烯
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Sub-Micrometer Core-Shell Rubber Particles Modified Polystyrene
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用乳液接枝聚合技术在粒径为100nm 的聚丁二烯(PB)乳胶粒子上接枝聚合苯乙烯(St),制得了具有不同核壳比(PB与PS的质量比)的一系列PB-g-PS接枝共聚物。将其与聚苯乙烯(PS)树脂熔融共混,考察了核壳比对PS/PB-g-PS共混物的力学性能和形态结构的影响,研究了共混物的增韧机理。结果表明,随着核壳比的增加,共混物的冲击强度呈现先增加后减小的趋势,并在核壳比为0/30时达到最大值,而橡胶粒子在基体中的聚集程度逐渐增大;均匀分散在基体中的橡胶粒子不能引发银纹,而发生聚集形成的橡胶粒子簇引发了大量的银纹成为共混物的主要形变机理。

    Abstract:

    Styrene was grafted onto polybutadiene latex with the diameter of 100nm, and a series of core-shell polybutadiene-graft-polystyrene(PB-g-PS) rubber particles, with the different core-shell ratio (m(PB)/m(PS)), were prepared by emulsion polymerization. These core-shell rubber particles were blended with polystyrene, and the effects of core-shell ratios on the mechanical properties and morphology of the blends and deformation mechanism of the blends were investigated. It is found that the impact strength of the blends increases and then decreases with the increasing of core-shell ratio, and it reaches the maximum with 70/30 core-shell ratio. The morphology results show that the aggregation of rubber particles has a upward tendency with the increasing of core-shell ratio. A large number of crazes cannot be initiated by rubber particles with monodisperse particle size of 100nm dispersed uniformly in PS matrix, and can be initiated by rubber particles aggregation formed in PS matrix.

    参考文献
    相似文献
    引证文献
引用本文

刘明明,宋立新,陈英楠,任 亮,张明耀,张会轩.微纳尺寸核壳橡胶粒子增韧聚苯乙烯[J].高分子材料科学与工程,2013,29(9):140-143. Mingming Liu, Lixin Song, Yingnan Chen, Liang Ren, Mingyao Zhang, Huixuan Zhang. Sub-Micrometer Core-Shell Rubber Particles Modified Polystyrene[J]. Polymer Materials Science & Engineering,2013,29(9):140-143.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司