高硬度单组分水性聚氨酯乳液的制备及性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Properties of One Component Waterborne Polyurethane with High Pencil Hardness
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以羟乙基双酚A(BPEA)作为水性聚氨酯(WPU)的新型扩链剂,聚环氧丙烷三醇(PPG310)为交联剂,利用透射电镜、热失重分析仪、动态力学分析仪、万能仪、铅笔硬度计对其产物进行了表征。结果表明,所制WPU 乳液粒子分散性良好,粒子呈20nm 左右球形,聚酯型WPU 比聚醚型软硬段相容性高,且储能模量、杨氏模量、铅笔硬度、耐水性能均优于聚醚型WPU。交联后的WPU 热稳定性提高,当BPEA 质量分数为28.7%,PPG310质量分数为13.6%时,所得涂膜的拉伸强度为49.1MPa,铅笔硬度可达2H,吸水率为6.8%。

    Abstract:

    A series of one component waterborne polyurethane (WPU) using ethoxylated bisphenol A (BPEA) as chain extender and polypropylene glycerin (PPG310) as crosslinker were prepared and characterized by TEM, TGA, DMA, universal testing machine, pencil hardness tester, and so on. The results show that the emulsion particles are well-dispersed with about 20 nm spherical shape. The storage modulus, Young’s modulus, pencil hardness, water resistance of polyester WPU polyether are superior to those of polyether WPU. The thermal stability of crosslinked WPU is enhanced. The film with high properties can be prepared through adjusting the content of BPEA and PPG310. The film with tensile strength 49.1MPa, pencil hardness 2H, water absorption 6.8% was prepared when mass fraction of BPEA and PPG310 were 28.7%, 13.6%, respectively.

    参考文献
    相似文献
    引证文献
引用本文

邓 盼,张 杰,张纯子,汤嘉陵.高硬度单组分水性聚氨酯乳液的制备及性能[J].高分子材料科学与工程,2013,29(9):157-159. Pan Deng, Jie Zhang, Chunzi Zhang, Jialing Tang. Preparation and Properties of One Component Waterborne Polyurethane with High Pencil Hardness[J]. Polymer Materials Science & Engineering,2013,29(9):157-159.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司