不同形貌聚苯胺/氧化锌复合材料的制备与光催化性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51062011);甘肃省教育厅项目


Synthesis and Photodegradation Characteristics of PANI/ZnO with Different Morphology
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过水热法制备了球形、棒状和花形的纳米氧化锌;并利用原位聚合法制备了对应形貌的氧化锌/聚苯胺复合材料。用X射线衍射(XRD)、热重分析(TG-DTG)和扫描电镜(SEM)等测试手段,对氧化锌及复合物进行了结构表征。以次甲基蓝为模拟污染物,在紫外灯下考察了复合物材料的光催化性能和动力学特征。结果表明,聚苯胺(PANI)/氧化锌(ZnO)复合材料的光催化性能远高于纯纳米ZnO,而不同形貌的PANI/ZnO 其光催化降解效率也不同,依次为球形>棒状>花形;PANI/ZnO(球形)的失水温度和分解温度与纯PANI相比分别提高了123.3℃和47.6℃。光催化动力学研究表明,以球形和棒状氧化锌为原料制备的PANI/ZnO 复合材料符合一级动力学,PANI/ZnO(花形)复合物符合二级动力学。

    Abstract:

    The spherical, rodlike and floriated nano ZnO and polyaniline (PANI)/ZnO composites were prepared respectively by hydrothermal method and in situ polymerization with zinc acetate, sodium hydroxide and ammonium etc. The structure of the composite was characterized by XRD, TG-DTA and SEM. The photodegradation and dynamic characteristics were also investigated in the methylene blue (MB) degradation under the UV lamp. The results show that PANI/ZnO composites show higher degradation efficiency than pure ZnO. The catalyst with the different morphology presents the different efficiency. The dehydration and decomposition temperature of spherical ZnO/PANI composites increases by 123.3 ℃ and 47.6 ℃ respectively than those of pure PANI. The dynamics research shows that the spherical and rodlike ZnO/PANI composites accord with pseudo-first-order dynamics, while the floriated ZnO/PANI composite conforms to the secondary dynamics.

    参考文献
    相似文献
    引证文献
引用本文

徐 惠,邢建伟,陈 泳.不同形貌聚苯胺/氧化锌复合材料的制备与光催化性能[J].高分子材料科学与工程,2013,29(9):164-168. Hui Xu, Jianwei Xing, Yong Chen. Synthesis and Photodegradation Characteristics of PANI/ZnO with Different Morphology[J]. Polymer Materials Science & Engineering,2013,29(9):164-168.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司