变厚度透镜注射压缩成型的三维数值模拟
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51073021);教育部新世纪人才计划和北京市优秀人才计划项目


3D Numerical Simulation of Injection Compression Molding Optical Lens with Variable Thickness
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于有限元法、ArbitraryLagrangian-Eulerian有限元网格变形法理论及White-Metzner粘弹性本构方程,采用Moldex软件进行了变厚度光学透镜成型的三维仿真分析。模拟表明,压缩阶段的挤压流存在显著三维流动特征,较常规注射,注射压缩能有效地降低注射压力、剪切率与流动残余应力及因此造成的翘曲和光程差。减小压缩速度使压缩阶段浇口压力升高较小、熔体剪切作用减弱;增大压缩距离,可以降低注射压力,减弱剪切作用。实际上这些变量在厚度和距离浇口不同位置的分布不同。

    Abstract:

    Based on finite element method, Arbitrary Lagrangian-Eulerian(ALE) meshing and White- Metzner viscoelastic constitutive equation, 3D simulation of molding optical lens with variable thickness was conducted using Moldex software. The results show that 3D flow characteristics cannot be ignored in injection compression molding. Such molding can decrease injection pressure, shear rate and residual stress as well as resultant warpage and flow-induced optical retardation. Smaller compression rate or larger compression distance corresponds with smaller gate pressure and shear rate. These parameters in the flow field varied in thickness direction and the distance from gate.

    参考文献
    相似文献
    引证文献
引用本文

谢春稳,王克俭.变厚度透镜注射压缩成型的三维数值模拟[J].高分子材料科学与工程,2013,29(9):169-174. Chunwen Xie, Kejian Wang.3D Numerical Simulation of Injection Compression Molding Optical Lens with Variable Thickness[J]. Polymer Materials Science & Engineering,2013,29(9):169-174.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司