氮化硼填充导热绝缘复合材料的研究进展
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

河北省自然科学基金资助项目(51073049,21001039)


Advances in Insulating Thermal Conductive Composite Filled with BN
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    近来,通过添加导热填料制备高导热绝缘聚合物基复合材料成为学者们研究的热点。文中综述了以氮化硼(BN)为填料的导热塑料、导热橡胶的研究现状。发现对无机填料进行表面处理,可以提高基体与填料间的相容性,减小两者间的热传导阻力;采用多模式的填料以适当的比例混杂填充聚合物基体,可以使填料间接触面积增大,从而有效提高聚合物基体的热导率。文中还简述了填充型导热复合材料的导热机理和典型理论模型,并提出了提高复合材料导热性的关键所在。

    Abstract:

    Recently, the preparation of insulating thermal conductive composites mixed with thermally conductive filler has become the research hotspot. The recent progress was summarized about the study of thermally conductive plastics and rubbers filled with boron nitride (BN). It is found that the surface treatment of inorganic filler can enhance the compatibility of polymer matrix and filler, the heat contact resistance decreases. Moreover, embedding of multi-modal filler in polymer matrix can make the contacting area among the particles increase with the addition of the appropriate content of filler, which can effectively improve the thermal conductivity of polymer matrix. The typically theoretical model and thermal conducting mechanism of composites were reviewed. The approaches to improve the thermal conductivity of polymer materials were also discussed.

    参考文献
    相似文献
    引证文献
引用本文

秦丽丽,王占京,侯 君,瞿雄伟,张立群,Saeed Z, Beckry A.氮化硼填充导热绝缘复合材料的研究进展[J].高分子材料科学与工程,2013,29(9):175-178. Lili Qin, Zhanjing Wang, Jun Hou, Xiongwei Qu, Liqun Zhang, Z Saeed, A Beckry. Advances in Insulating Thermal Conductive Composite Filled with BN[J]. Polymer Materials Science & Engineering,2013,29(9):175-178.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司