共注射制品芯层厚度分析的数值模拟
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Numerical Simulation of Core Thickness Fraction of Molded Products in Co-Injection Molding
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用数值模拟技术对共注射成型过程进行了充填分析,从芯层材料的厚度分布以及芯层材料的穿透距离进行了研究。结合试验设计(DOE),研究了注射速率、模具温度、皮层熔体温度、芯层熔体温度和表层材料体积百分数对芯层厚度分布的影响;同时采用FractionalFactorial方法,研究工艺参数以及之间的交互作用对芯层材料穿透距离的影响度。结果表明,皮层材料注射的体积百分数对制品的芯层材料的厚度分布及芯层材料的穿透距离影响最大,其它影响因子影响较小。

    Abstract:

    Based on filling simulation in co injection molding and design of experiment(DOE) technology, Moldflow software was used to analyze the core thickness fraction distribution and the penetration length of the core melt. Injection flow rate, mold temperature, skin temperature, core temperature and volume skin were regarded as process parameters. The fractional factorial design method was introduced to investigate the significance of process parameters, and the effect of each factor on the quality response of mold part was also studied. Co-injection molding simulation analyses show that volume skin has the great impact on core thickness fraction distribution and the penetration length of the core melt, while the influences of mold temperature and melt temperature are comparatively inappreciable.

    参考文献
    相似文献
    引证文献
引用本文

赵 建,曲敏杰,夏 英,郭 静,冯 钠,张勤星.共注射制品芯层厚度分析的数值模拟[J].高分子材料科学与工程,2013,29(9):183-186. Jian Zhao, Minjie Qu, Ying Xia, Jing Guo, Na Feng, Qinxing Zhang. Numerical Simulation of Core Thickness Fraction of Molded Products in Co-Injection Molding[J]. Polymer Materials Science & Engineering,2013,29(9):183-186.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司