聚乙二醇硅烷的合成及对不锈钢表面的修饰
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

总装维改预研基金资助项目(513270401)


Synthesis of Silanes Containing Poly(Ethylene Glycol) and Their Modification to Stainless Steel Surface
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过甲苯二异氰酸酯依次与3-氨基丙基三乙氧基硅烷偶联剂(KH550)和聚乙二醇(PEG)反应合成了含有不同相对分子质量的聚乙二醇结构单元的硅烷。采用溶胶-凝胶法,用自制的PEG 硅烷对不锈钢表面进行修饰。由衰减全反射傅里叶变换红外光谱(ATR-FT-IR)和X射线光电子能谱(XPS)可以看出,金属表面的C、Si元素含量增加,金属元素含量减少且有与硅烷相对应的红外吸收峰;接触角随着硅烷中PEG相对分子质量的增加而逐渐减小,但当PEG相对分子质量为6000时,接触角有所增大。电化学阻抗测量和浸泡试验结果表明,随着聚乙二醇链段相对分子质量的增大,改性后钢板的耐蚀性增强。

    Abstract:

    The silanes containing poly(ethylene glycol) (PEG) units were synthesized by the reactions of toluene diisocyanate with 3-aminopropyltriethoxysilane and PEGs of different molecular weights. PEG silanes were used to modify surfaces of stainless steel by sol-gel method. The results of attenuated total reflectance Fourier transform infrared spectra and X-ray photoelectron show that the element content of surface elements C, Si increase, but the content of metal elements decrease and the infrared absorption peaks which is corresponding to silanes in the metals surface emerge. The results of contact angle measurements show that along with the increasing of the molecular weight of PEG, the contact angle decreases. When the molecular weight of PEG is 6000, the contact angle increases. The results of electrochemical impedance measurements and the soaking experiments show that the corrosion-resistance of the metals grafted by PEG silanes is improved as molecular weight of PEG increases.

    参考文献
    相似文献
    引证文献
引用本文

刘明光,晏 欣,余红伟,王源升,孙卫红.聚乙二醇硅烷的合成及对不锈钢表面的修饰[J].高分子材料科学与工程,2013,29(10):13-16. Mingguang Liu, Xin Yan, Hongwei Yu, Yuansheng Wang, Weihong Sun. Synthesis of Silanes Containing Poly(Ethylene Glycol) and Their Modification to Stainless Steel Surface[J]. Polymer Materials Science & Engineering,2013,29(10):13-16.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司