聚烯烃/蒙脱土纳米复合材料堆密度的控制及热性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

辽宁省聚合物催化合成技术重点实验室专项基金资助项目(辽科发[2010]36号)


Bulk Density Controll and Thermal Properties of PE/MMT Nanocomposites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    制备了蒙脱土(MMT)负载Ziegler-Natta催化剂,通过原位聚合法制备PE/MMT 纳米复合材料。考察了催化剂制备过程中醇的种类、用量和MMT用量对催化剂活性和复合材料堆密度的影响。扫描电镜(SEM)分析了复合材料的颗粒形态,结果表明,聚合物颗粒呈球形且堆积紧密时材料的堆密度最高。用差示扫描量热(DSC)分析了复合材料的结晶行为,结果表明,MMT的加入可以提高材料结晶度。热重(TG)分析测试了材料的热氧化降解过程,结果表明,MMT的加入主要影响复合材料的热降解起始温度,而对热分解温度的影响很小。

    Abstract:

    Polyethylene(PE)/montmorillonite(MMT) nanocomposites were prepared by in situ polymerization of ethylene with MMT supported Ziegler-Natta catalyst. The effects of the type and dosage of alcohol and the amount of MMT on ethylene polymerization activity and the nanocomposite bulk density were studied. Particle morphology characterized by SEM shows that the bulk density of polymer is the highest when polymer particles are spherical. The crystal behavior of the PE/MMT nanocomposites observed by DSC shows that the polymer crystallinity could be improved by addition of MMT. The thermal oxidation degradation of nanocomposites studied by TG reveals that the addition of MMT mainly affects the initial temperature of thermal degradation, while has no obvious influence on the end temperature of thermal degradation.

    参考文献
    相似文献
    引证文献
引用本文

牛秋成,李三喜,王 健,冯文元,王 松,张爱玲.聚烯烃/蒙脱土纳米复合材料堆密度的控制及热性能[J].高分子材料科学与工程,2013,29(10):45-49. Qiucheng Niu, Sanxi Li, Jian Wang, Wenyuan Feng, Song Wang, Ailing Zhang. Bulk Density Controll and Thermal Properties of PE/MMT Nanocomposites[J]. Polymer Materials Science & Engineering,2013,29(10):45-49.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司