改性环氧树脂的合成及在低红外发射率涂层上的应用
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

航空科学基金资助项目(2009ZA52013);国家自然科学基金资助项目(51173079)


Preparation of Modified Epoxy Resin and Its Application in the Low Infrared Emissivity Coating
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    合成了聚氨酯改性环氧树脂,研究了合成改性环氧树脂的最佳反应时间,通过红外光谱(IR)研究了聚氨酯预聚体和环氧树脂之间的化学反应,不同聚氨酯预聚物添加量对改性树脂固化物冲击韧性和拉伸强度的影响,并以该树脂制备了低红外发射率涂层,研究了聚氨酯不同添加量及固化剂种类对涂层柔韧性和硬度的影响。结果表明,制备改性环氧树脂的最佳反应时间为3h,红外谱图显示聚氨酯预聚体成功接枝到环氧树脂上。当聚氨酯预聚体的添加量为环氧树脂质量的10%时,改性树脂冲击韧性和拉伸强度达到最大值;选用聚酰胺为固化剂时,涂层的柔韧性可达1mm,铅笔硬度始终保持在3H。

    Abstract:

    Epoxy resin was modified with polyurethane. The optimum reaction time, and the effects of the mass fraction of polyurethane on the impact strength and tensile strength of the modified epoxy resin were studied by IR spectroscopy and mechanical measurements. The effects of the mass fraction of polyurethane, the kinds of the curing agents on the toughness and hardness of the coating were also investigated. The results show that the best reaction time is 3h. IR spectroscopy show PU prepolymer was successfully grafted onto epoxy resin. When the mass fraction of polyurethane prepolymer is 10% of modified epoxy resin,the impact strength and tensile strength of the modified epoxy resin reach the maximum, and the toughness of the coating can be improved to 1mm and the hardness keeps 3H.

    参考文献
    相似文献
    引证文献
引用本文

乔加亮,徐国跃,丁儒雅,段凯歌,张伟钢.改性环氧树脂的合成及在低红外发射率涂层上的应用[J].高分子材料科学与工程,2013,29(10):68-71. Jialiang Qiao, Guoyue Xu, Ruya Ding, Kaige Duan, Weigang Zhang. Preparation of Modified Epoxy Resin and Its Application in the Low Infrared Emissivity Coating[J]. Polymer Materials Science & Engineering,2013,29(10):68-71.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司