纳米二氧化硅/聚丙烯酸酯复合双重固化乳液的结构与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广东省自然科学基金资助项目(10151009001000047)


Structure and Performances of Nano Silica/Polyacrylate Composite Dual Curing Emulsion
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用核壳乳液聚合法制得了纳米二氧化硅/聚丙烯酸酯复合双重固化乳液。系统研究了纳米二氧化硅的加入对紫外光-热双重固化乳液的固化速率、乳液性能及乳液涂层性能的影响,并对复合乳液的核壳结构进行了表征。实验结果表明,合成的复合双重固化乳液具有核壳结构,复合粒子的平均粒径在200nm 左右。当乳液中硅溶胶的含量为5%时,乳液及其涂膜的性能最佳,此时乳液的涂膜硬度达到4H,附着力0级,耐乙醇擦拭234次不破膜,且硅溶胶的引入有助于提高乳液涂膜的耐热性能。

    Abstract:

    The nano silica/polyacrylate composite dual curing emulsion was synthesized by core-shell polymerization. The influences of nano silica on thermal-UV dual curing rate, emulsion and film performances were analyzed, and the core-shell structure was characterized. The results show that the core-shell structure exists, and the average particle diamond is about 200nm. The emulsion and its film have the best performances when the mass fraction of nano silica is 5%, for example, the hardness of film is 4H, adhesion is 0 grade, ethanol resistance is 234 times of wiping without film breaking. The heat resistance is improved with the introduction of nano silica.

    参考文献
    相似文献
    引证文献
引用本文

郭 婧,梁 亮,刘 楠,罗思远,黄志辉.纳米二氧化硅/聚丙烯酸酯复合双重固化乳液的结构与性能[J].高分子材料科学与工程,2013,29(10):81-84. Jing Guo, Liang Liang, Nan Liu, Siyuan Luo, Zhihui Huang. Structure and Performances of Nano Silica/Polyacrylate Composite Dual Curing Emulsion[J]. Polymer Materials Science & Engineering,2013,29(10):81-84.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司