单螺杆挤出过程中聚合物混合状态的超声在线监测技术
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

山西省科技攻关项目(20110321029);国家自然科学基金资助项目(61201412);山西省青年科技研究基金(2012021011-5)


Ultrasonic Online Monitoring Technology for Polymer Compounding State in a Single Screw Extruder
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    单螺杆挤出过程中聚合物的混合状态会影响产品最终的性能。文中以超声检测技术为手段,在原有超声缓冲杆的基础上,研究了聚合物混合状态的在线监测技术、信号处理方法和状态表征。通过分析不同位置传感器的超声回波B扫描图和螺杆不同结构的回波信号选择有效数据,并用其方差作为聚合物混合状态的表征量,用样本电镜扫描图进行验证。实验结果得出,检测过程的B扫描图可以直观地判断聚合物的熔融和混合状态,特征信号幅度方差越大,说明聚合物混合越均匀,表明这种方法能够有效区分出聚合物混合的均匀性。

    Abstract:

    In the process of single screw extrusion, the mixed state of the polymer will affect the performance of the final product. In this paper, the ultrasonic online monitoring technic, signal processing methods and state characterization for polymer compounding state were studied. The variance of valid data was used to represent polymer compounding state based on the ultrasonic B-scangram at different position sensors and the echo signals of different screw structures.Verified by the sample scan electron microscopy, the experimental results shows that the B scangram can visually distinguish the state of polymer. The polymer is mixed more evenly, the amplitude variance of signals is greater, implying that this method is effective to distinguish the uniformity of polymer mixture.

    参考文献
    相似文献
    引证文献
引用本文

陈友兴,王召巴,贾润礼,韩 婧,褚红伟.单螺杆挤出过程中聚合物混合状态的超声在线监测技术[J].高分子材料科学与工程,2013,29(10):94-97. Youxing Chen, Zhaoba Wang, Runli Jia, Jing Han, Hongwei Chu. Ultrasonic Online Monitoring Technology for Polymer Compounding State in a Single Screw Extruder[J]. Polymer Materials Science & Engineering,2013,29(10):94-97.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司