剪切塑性变形聚丙烯的形态和冲击断裂行为
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家科技支撑计划(2012BAD32B01)


Morphology and Impact Fracture Behavior of Plastically Shear Deformed Polypropylene
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用光学显微镜(ROM)、扫描电子显微镜(SEM)、广角X射线衍射(WAXD)、动态力学分析(DMA)和仪器化冲击仪对剪切塑性变形后等规聚丙烯(iPP)的结构和性能进行了研究。剪切塑性变形通过等通道转角挤压技术获得。结果表明,剪切塑性变形使iPP球晶变为近椭圆形,其长轴沿着剪切方向取向排列,iPP的结晶度降低,动态储能模量(E’)增加,晶片间分子链活动性降低。根据微纤模型分析剪切变形后iPP的冲击断裂行为,表明取向微纤和系分子的存在使iPP的断裂需要更多的裂纹引发能和扩展能,并带来悬臂梁缺口冲击强度的增加,是未变形试样的4.8倍。

    Abstract:

    Reflected optical microscopy (ROM), scanning electron microscopy (SEM) and wide angle X-ray diffraction (WAXD), and dynamic mechanical analysis (DMA) and instrumented impact tester were utilized to study the structure and property of isotactic polypropylene (iPP) after plastically shear deformed. The equal channel angular extrusion technique was used to achieve the shear condition. The results show that the original spherulites are deformed into nearly ellipsoids with their long axis tilted along the shear direction, the degree of crystallinity decreases, the dynamic storage modulus (E’) increases with reduced mobility of the molecular chains in the amorphous region. The impact fracture behavior of the shear deformed iPP was discussed according the fibrillar model, which suggested that the oriented fibrillar structure and the stretched molecular chains are responsible for the increase of energy required for crack initiation and propagation, resulting in the improvement of impact strength of iPP, as much as 4.8 times of that of the un-deformed sample.

    参考文献
    相似文献
    引证文献
引用本文

王婷兰,唐颂超,潘泳康,王庆海.剪切塑性变形聚丙烯的形态和冲击断裂行为[J].高分子材料科学与工程,2013,29(10):101-104. Tinglan Wang, Songchao Tang, Yongkang Pan, Qinghai Wang. Morphology and Impact Fracture Behavior of Plastically Shear Deformed Polypropylene[J]. Polymer Materials Science & Engineering,2013,29(10):101-104.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司