用于骨内固定复合材料的可全降解聚磷酸钙纤维增强不饱和聚酯酰胺脲树脂的性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(31060134,81260230);2011年吉安市科技计划指导性项目


Fully Degradable Calcium Polyphosphate Fiber Reinforced Unsaturated Polyester Urea Resin Used as Bone Fixed Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过融熔缩聚法合成出一种低成本的不饱和聚酯酰胺脲树脂并表征了其性能。以此为基体,聚磷酸钙纤维(CPPF)为增强体,引入一定量的交联剂和引发-促进剂经室温交联后再在一定温度深度交联成可完全降解的CPPF/不饱和聚酯酰胺脲树脂复合材料,研究了其物理力学和降解性能。结果表明,合成的基体树脂中加入20%交联剂室温预交联再热处理后复合材料具有较高的力学强度;当CPPF的质量分数超过60%时,复合材料的力学强度出现下降的趋势,降解3个月后,含30%CPPF和50%CPPF的复合材料的弯曲强度分别能保持143MPa和148MPa。

    Abstract:

    The low cost unsaturated poly(ester-amide) urea resin was synthesized by melt polycondensation and its performance was characterized. Calcium polyphosphate fiber (CPPF) was introduced to reinforce unsaturated poly(ester-amide) urea resin, and completely degraded CPPF/unsaturated poly(ester-amide) urea resin composites were prepared by adding a certain amount of crosslinking agent and initiator-accelerant agent at room temperature. Its mechanical performance and degradation properties were studied. The results show that the matrix resin crosslinked with 20% cross-linking agent at room temperature has high mechanical strength after heat treatment. As CPPF content exceeds 60%, the mechanical strength of the composites decreases. After 3 months , the bending strength of composites with 30% and 50% CPPF still maintain 143MPa and 148MPa respectively.

    参考文献
    相似文献
    引证文献
引用本文

艾永平,刘利军.用于骨内固定复合材料的可全降解聚磷酸钙纤维增强不饱和聚酯酰胺脲树脂的性能[J].高分子材料科学与工程,2013,29(10):109-112. Yongping Ai, Lijun Liu. Fully Degradable Calcium Polyphosphate Fiber Reinforced Unsaturated Polyester Urea Resin Used as Bone Fixed Composites[J]. Polymer Materials Science & Engineering,2013,29(10):109-112.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司