相分离法制备多孔聚合物超疏水涂层
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(20876065,21076092)


Preparation of Superhydrophobic Porous Polymeric Coating via Phase Separation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以1,4-丁二醇(BDO)和环己醇为致孔剂,甲基丙烯酸丁酯(BMA)为反应性单体、乙二醇二甲基丙烯酸酯(EDMA)为交联单体,偶氮二异丁腈(AIBN)为引发剂进行原位自由基聚合,利用相分离法制备了具有超疏水性能的多孔聚合物涂层。考察了EDMA和BDO 用量对涂层性能的影响。通过接触角(CA)、扫描电镜(SEM)和原子力显微镜(AFM)对涂层的疏水性和结构进行了表征。结果表明,涂层的疏水性分别随着EDMA 和BDO 用量的增加先升高后下降,当ω(EDMA)=25%及ω(BDO)=25%时,涂层表面具有微/纳米复合结构,其静态水接触角(CA)和滚动角(SA)分别为153.8°和4°,不同pH 条件下涂层均显示良好的耐酸碱盐效果。

    Abstract:

    In-situ free-radical polymerization of porous polymeric coatings with superhydrophobic property were carried out via the phase separation method, using 1,4-butanediol (BDO) and cyclohexanol as pore-forming agent, butyl methacrylate (BMA) as main monomer, ethylene dimethacrylate (EDMA) as cross-linking agent, and 2,2’-azobisisobutyronitrile (AIBN) as initiator. The influences of contents of EDMA and BDO on the properties of the coatings were discussed. The hydrophobic property and structure of the coatings were characterized by contact angle (CA), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The experimental results indicate that, with the contents of EDMA and BDO increasing, the hydrophobicity of the coatings rises first and then declines. The hierarchical micro/nano-structures of the polymer coating can be observed by SEM and AFM when ω(EDMA) and ω(BDO) are 25% and 25%, respectively. The contact angle (CA) and sliding angle (SA) of the coating are 153.8° and 4°, respectively. Furthermore, the coating shows better resistance to acid, alkali or salt under different pH condition.

    参考文献
    相似文献
    引证文献
引用本文

刘建峰,肖新颜,蔡锡松.相分离法制备多孔聚合物超疏水涂层[J].高分子材料科学与工程,2013,29(10):113-117. Jianfeng Liu, Xinyan Xiao, XisongCa. Preparation of Superhydrophobic Porous Polymeric Coating via Phase Separation[J]. Polymer Materials Science & Engineering,2013,29(10):113-117.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司