聚苯胺/聚吡咯复合薄膜电极的制备及其超电容和耐腐蚀性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51062011);甘肃省教育厅项目


Capacitance Characteristics and Corrosion Resistance of Polyaniline/ Polypyrrole Composite Film Prepared by Electrochemical Method
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在聚苯胺(PANI)和聚吡咯(PPy)的相应单体溶液中,采用循环伏安法(CV)在不锈钢基体(SS)上分层聚合制备了具有聚苯胺/聚吡咯复合薄膜(PANI/PPy/SS)的电极材料。用傅里叶变换红外光谱(FT-IR)、X射线衍射(XRD)对其结构进行了表征。在0.5mol/LH2SO4 中,对PANI/PPy/SS电极材料进行了循环伏安法、恒流充放电、交流阻抗谱(EIS)等电化学性能测试,并用塔菲尔曲线(Tafel)研究了其耐腐蚀性能。结果表明,当电流密度为5mA/cm2 时,PANI/PPy/SS电极材料比电容达747.5F/g,且复合膜的腐蚀电位相对于单纯的PANI、PPy薄膜分别正移了0.064V、0.117V,表现出较好的耐腐蚀性,是一种应用前景很好的超级电容器材料。

    Abstract:

    Polyaniline/polypyrrole(PANI/PPy) composite films were synthesized on a stainless steel substrate by cyclic voltammetry (CV) in the corresponding monomer solution. The structure of the composite film were characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD). The electrochemical supercapacitor properties of the composite film were investigated by cyclic voltammetry, galvanostatic charge-discharge and electrochemical impedance spectroscopy (EIS) in 0.5mol/L H2SO4 electrolyte, and the corrosion resistance of the composite film was researched simply by Tafel curves. The results suggest that the specific capacitance of the composite film is up to 747.5 F/g at a current density of 5 mA/cm2, and the corrosion potential of the composite film shift positively by 0.064V, 0.117V compared with that of the pure PANI, PPy film, respectively, which suggest that the composite films turn out to be a promising material for supercapacitor.

    参考文献
    相似文献
    引证文献
引用本文

徐 惠,李俊玲,彭振军,庄君霞,张俊龙.聚苯胺/聚吡咯复合薄膜电极的制备及其超电容和耐腐蚀性[J].高分子材料科学与工程,2013,29(10):133-137. Hui Xu, Junling Li, Zhenjun Peng, Junxia Zhuang, Junlong Zhang. Capacitance Characteristics and Corrosion Resistance of Polyaniline/ Polypyrrole Composite Film Prepared by Electrochemical Method[J]. Polymer Materials Science & Engineering,2013,29(10):133-137.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司