穿透裂纹对开口复合材料柱壳屈曲性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of Penetrated Crack on Compressive Buckling Performance of Composite Cylindrical Shells with an Open Hole
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了解决复合材料柱壳结构成型过程中产生裂纹的问题,为复合材料柱壳类结构设计与质量控制提供参考,文中采用有限元方法分析了含穿透裂纹开口复合材料柱壳的压缩屈曲性能,分析了裂纹长度与方向的影响。结果表明,45°方向的穿透裂纹,其长度小于130mm 时,柱壳屈曲强度随裂纹长度的增长略有下降;超过130mm,屈曲强度明显下降。对于定长裂纹,随着裂纹方向角的增加,结构的屈曲强度不断降低。裂纹对柱壳压缩屈曲强度的影响程度本质上取决于裂纹对原有载荷传递路径的影响程度。

    Abstract:

    In order to solve the problem of cracking during the manufacture process of composite cylindrical shells as well as provide a reference for composite cylindrical shell structural design and quality control, finite element method was used to analyze the compression buckling performance of composite cylindrical shells with penetrated cracks. The result indicates that, for composite cylindrical shells with 45°cracks, the buckling strength decreases gently with the increasing of crack when the crack length is shorter than 130mm, while it drops sharply when crack length is longer than 130mm. For composite cylindrical shells with 164mm cracks, the buckling strength reduces with the direction angle increasing. The impact level of crack to the buckling strength is essentially determined by the influence level of crack to the load path.

    参考文献
    相似文献
    引证文献
引用本文

武鹏飞,程小全,张 涛,许亚洪.穿透裂纹对开口复合材料柱壳屈曲性能的影响[J].高分子材料科学与工程,2013,29(10):179-182. Pengfei Wu, Xiaoquan Cheng, Tao Zhang, Yahong Xu. Effect of Penetrated Crack on Compressive Buckling Performance of Composite Cylindrical Shells with an Open Hole[J]. Polymer Materials Science & Engineering,2013,29(10):179-182.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司