Abstract:Using boron trifluoride diethyl ether as catalyst, ethylene glycol (EG) as the starting agent, the homopolymerization reaction of 2, 3-epoxy pinane and the copolymerization reaction of 2, 3-epoxy pinane and epichlorohydrin (ECH) were carried out. The results of FT-IR, EA and 1H-NMR analysis show that the low molecular weight homopolymerization and copolymerization reaction happened and the end hydroxy pinane-base polyether and pinane-base-ECH copolyether were obtained, respectively. The optimal technical conditions for synthesis of two kinds of polyether were discussed. Pinane-base polyether for: the mass of catalyst BF3·OEt2 is 1.0% of the raw materials mass, initiator dosage of EG is 1.2% of the raw material mass, mass of CH2Cl2 equals the mass of raw material, reaction time of 5 h, temperature of 0 ℃. n(2,3-epoxy pinane)∶n(ECH) of Pinane-base-ECH polyether is 0.5∶1, catalyst dosage of BF3·OEt2 is 1.0% of the raw material mass, initiator dosages of EG are 1.5% of the raw material mass, dosages of CH2Cl2 equals the mass of raw material, reaction time of 6 h, temperature of 0 ℃. Under the optimum polymerization conditions, the results demonstrate that the weight-average molecular weight (Mw) of pinane-base polyether and pinane-base-ECH copolyether is 500 g/mol and 700 g/mol, respectivley.