聚氨酯/苯乙烯弹性体复合材料的合成及性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Synthesis and Performance of Polyurethane/Styrene Elastomer Composite
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚醚多元醇、2,4-甲苯二异氰酸酯和甲基丙烯酸羟乙酯为原料合成端基含双键的聚氨酯封端预聚体,再加入苯乙烯单体和2-羟基-2-甲基-1-苯基-1-丙酮光敏引发剂,在紫外光照下以自由基共聚合方式合成聚氨酯/苯乙烯弹性体复合材料。研究了苯乙烯单体用量、光照时间和引发剂用量对复合材料性能的影响,并用红外光谱(FT-IR)和差示扫描量热分析(DSC)对产物进行了表征。结果表明,聚氨酯封端预聚体与苯乙烯单体质量比为 10∶9 ,引发剂质量为苯乙烯单体的 0.6% ,紫外光固化3 h时,产物力学性能良好,且为无规共聚结构。

    Abstract:

    Using blocked polyurethane prepolymer with double bond in the end, styrene and 2 - hydroxy - 2 - methyl -1- phenyl -1-acetone, polyurethane/styrene elastomer composites were prepared by free-radical copolymerization under UV irradiation. The blocked polyurethane prepolymer was synthesized with polyether polyol, 2, 4 - toluene diisocyanate and methyl acrylic hydroxy ethylester. The effects of styrene contents, time of light length and dosage of initiator on the properties of composite material were investigated by FT-IR and DSC. The results indicate that the properties are better when the mass ratio of blocked polyurethane prepolymer to styrene is 10∶9, the mass of initiator is 0.6% of the styrene monomer, the illumination time is 3h, the elastomer composite is a random copolymer.

    参考文献
    相似文献
    引证文献
引用本文

赵亚丽, 李莉, 李晓云, 李绩, 李万捷.聚氨酯/苯乙烯弹性体复合材料的合成及性能[J].高分子材料科学与工程,2013,29(11):24-27. Yali Zhao, Li Li, Xiaoyun Li, Ji Li, Wanjie Li. Synthesis and Performance of Polyurethane/Styrene Elastomer Composite[J]. Polymer Materials Science & Engineering,2013,29(11):24-27.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司