液体橡胶增韧环氧树脂的力学性能及增韧机理
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51073052)


Mechanical Properties and Toughening Mechanism of Rubber Toughening Epoxy Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    比较了3种不同的液体橡胶增韧环氧树脂复合材料的力学性能,用电镜观察了复合材料的形态结构以及冲击断面的形貌,并据此提出了增韧机理。结果表明,随着橡胶含量的增加,复合材料的拉伸强度不断降低,而冲击强度呈现出先增加后降低的趋势;液体橡胶中丙烯腈的含量越高,对环氧树脂的增韧效果越好。而且,丙烯腈含量不同的橡胶,其增韧机理也明显不同。此外,将橡胶粒子的尺寸与基体交联网络的网格尺寸相关联,讨论了不同尺寸的橡胶粒子对交联网络的影响,从而解释了橡胶粒子尺寸对基体性能的影响。

    Abstract:

    The toughening effects of three kinds of liquid rubber on epoxy were investigated. It is shown that the yield stress of composites decreases with the liquid rubber content increasing, while impact strength exhibits the maximum value in the range from 10phr to 15phr rubber inclusion. The liquid rubber with higher acrylonitrile content exhibits better toughening effect, and the toughening mechanisms are mainly matrix shear deformation and crack pinning. For the liquid rubber with lower acrylonitrile content, the cavitation of rubber particles and subsequent void growth by matrix shear deformation are predominant toughening mechanisms. Besides, the size of the rubber particles is correlated with the mesh size of the cross-linking network of the epoxy matrix in order to interpret the size effect of rubber particles on the properties of the composites.

    参考文献
    相似文献
    引证文献
引用本文

周恒石, 徐世爱.液体橡胶增韧环氧树脂的力学性能及增韧机理[J].高分子材料科学与工程,2013,29(11):50-53. Hengshi Zhou, Shi’ai Xu. Mechanical Properties and Toughening Mechanism of Rubber Toughening Epoxy Resin[J]. Polymer Materials Science & Engineering,2013,29(11):50-53.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司