几种聚合物熔体黏度与超声波声速关系的表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51073021);教育部新世纪优秀人才和北京市优秀人才课题


Calculating Viscosity of Several Polymer Melts from Ultrasonic Velocity
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于熔体黏度与温度的2种表征方法及松弛时间的表达式,考虑超声波测量原理,建立了声速 黏度的线性模型、指数模型和幂率模型;介绍了超声流变测试的一种方法。通过实验数据拟合得到具体表达式预测的结果接近实验值,平均相对误差小于10%。分析表明,线性模型适于较低温度范围,而指数模型适于温度较高的范围。应用模型分析实验数据表明,方程参数可间接反映柔性等材料特性,聚苯乙烯(PS)等分子刚性较大材料的黏度对声速变化更敏感,而聚丙烯(PP)和聚乙烯(HDPE)的相对较低。这显示了超声流变测试学不仅可用于工艺设备调控,还可用于材料学研究。

    Abstract:

    Based on the expressions between viscosity or relaxation time and temperature and ultrasonic theorem, three models of viscosity versus ultrasonic velocity were established including linear-, exponential- and power law-type model. Ultrasonic probes were fixed on capillary to simultaneously measure viscosity and ultrasonic velocity. The predicted values using the new models are close to experimental data after fitting equation parameters, the average absolute relative deviation is less than 10%. The consistency content suggests that the linear model can be well used at lower temperature against exponential model better at higher temperature. The model parameters exhibit material characteristics such as molecular flexibility. It is found that the changes of viscosity against ultrasonic velocity for such rigid molecules as PS are more sensitive than for PP and HDPE, which implies that ultrasonic rheometry is useful not only in adjusting process variables and processing equipment but also in characterizing materials.

    参考文献
    相似文献
    引证文献
引用本文

胡坤, 王克俭.几种聚合物熔体黏度与超声波声速关系的表征[J].高分子材料科学与工程,2013,29(11):88-91. Kun Hu, Kejian Wang. Calculating Viscosity of Several Polymer Melts from Ultrasonic Velocity[J]. Polymer Materials Science & Engineering,2013,29(11):88-91.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司