用于固体火箭发动机衬层固化过程监测的超声缓冲杆
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

山西省科技攻关项目(20110321029);山西省青年科技研究基金(20120210115)


Ultrasonic Buffer Rod for Cure Process Monitoring of Solid Rocket Engine Liner
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对固体火箭发动机衬层固化过程普通超声探头监测要求,通过理论和试验研究了不同材料、不同规格超声缓冲杆的特征回波、尾随波以及信噪比,并对传热过程进行仿真,计算了缓冲杆的长度。结果表明,利用聚醚醚酮(PEEK)缓冲杆进行衬层固化过程超声监测,特征回波能量大、尾随波能量小、信噪比高,适于固体火箭发动机衬层固化过程实时监测。

    Abstract:

    To meet the needs of monitoring the curing process of solid rocket engine liner by common ultrasonic probe, the signal-noise-ratio, characteristic echo and following echo for different materials and specifications of ultrasonic buffer rods were studied and the heat transfer process was simulated to calculate the length of buffer rod. The results show that monitoring curing process of the liner using polyetheretherketone(PEEK) buffer rod has merits of bigger characteristic echo, smaller following echo and higher signal-noise-ratio, which is suitable for real-time monitoring the curing process of solid rocket engine.

    参考文献
    相似文献
    引证文献
引用本文

杨亚军, 王召巴.用于固体火箭发动机衬层固化过程监测的超声缓冲杆[J].高分子材料科学与工程,2013,29(11):101-104. Yajun Yang, Zhaoba Wang. Ultrasonic Buffer Rod for Cure Process Monitoring of Solid Rocket Engine Liner[J]. Polymer Materials Science & Engineering,2013,29(11):101-104.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司