碳纳米管交联改性叠氮缩水甘油醚聚合物粘合剂胶片的制备及性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21001071)


Preparation and Properties of Carbon Nanotubes Modified Glycidyl Azide Polymer Binder Film
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以羟基化碳纳米管(CNT-OH)为交联剂,叠氮缩水甘油醚聚合物(GAP)为预聚物,甲苯二异氰酸酯(TDI)为固化剂,制备了纳米改性的GAP含能粘合剂胶片,并进行了固化反应参数的优化和相关性能表征。在CNT-OH的质量分数为1%,R(NCO与OH的摩尔比)值为1.4时,胶片的力学性能最佳,其拉伸强度可达7.2MPa,延伸率为375%。热失重分析(TGA)结果表明,在交联网络结构中引入碳纳米管后,叠氮基团和聚醚主链的分解峰温同时滞后,胶片的热稳定性提高。差示扫描量热分析(DSC)结果表明,当CNT-OH质量分数为1%时,玻璃化转变温度(Tg)低于-40 ℃

    Abstract:

    Nano-modified glycidyl azide polymer (GAP) energetic binder films were prepared using hydroxylation carbon nanotubes (CNT-OH) as crosslinking agent, GAP as prepolymer and toluene diisocyanate (TDI) as curing agent. Optimization of curing process parameters and relative characterization were carried out at the same time. The tensile strength of binder film rises to 7.2MPa and the breaking elongation is 375% with w(CNT-OH) of 1%, and R of 1.4. The results of thermal gravimetric analysis (TGA) show that the decomposition temperature of azide group and polymer backbone are both increased when carbon nanotubes was introduced into crosslinked network. Therefore the thermal stability of binder film is improved as well. Differential scanning calorimetry (DSC) results show that glass transition temperature (Tg) is below -40 ℃ when w(CNT-OH) equals 1%

    参考文献
    相似文献
    引证文献
引用本文

张弛, 李杰, 罗运军, 张向飞, 翟滨.碳纳米管交联改性叠氮缩水甘油醚聚合物粘合剂胶片的制备及性能[J].高分子材料科学与工程,2013,29(11):105-108. Chi Zhang, Jie Li, Yunjun Luo, Xiangfei Zhang, Bin Zhai. Preparation and Properties of Carbon Nanotubes Modified Glycidyl Azide Polymer Binder Film[J]. Polymer Materials Science & Engineering,2013,29(11):105-108.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司