Abstract:In order to improve the film property of waterborne epoxy resin coating, a silicon-containing waterborne epoxy curing agent was prepared using triethylene tetramine (TETA), phenolic epoxy resin (F-51), octyl glycidyl ether(OGE) and monoepoxy-based silicon-containing compound(JH-0187) as raw materials. Firstly, TETA-OGE/JH-0187 was synthesised using OGE/JH-0187 as sealing reagents of TETA in propylene glycol methyl ether(PM)under the condition of reaction temperature(65 ℃) and reaction time(6.5h). Secondly, phenolic epoxy resin (F-51) reacted dropwise with TETA-OGE/JH-0187 to synthesize F-51-TETA-OGE/JH-0187. In order to improve the water dispersibility of F-51-TETA-OGE/JH-0187, acetic acid was used with the salting degree of 20%. Finally, after PM was removed by distillation, water was added into F-51-TETA-OGE/JH-0187 until solids content became 45%. The effects of reaction temperature, reaction time on the epoxy conversion were discussed. And also the effects of silicon content of the curing agent on the prepared film property were discussed. The results indicate that the two-component film with prepared waterborne epoxy curing agent of 5%~7.5% and epoxy resin has good mechanical performances and anticorrosive performance.