癸二酰二苯甲酰肼对聚L-乳酸/玻璃纤维复合材料结晶性能及力学性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of N,N′-Bis(Benzoyl) Sebacic Acid Dihydrazide on Crystallization Behavior of Poly(L-Lactic Acid)/Glass Fiber Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用差示扫描量热仪(DSC)研究了癸二酰二苯甲酰肼(BSAD)成核剂对聚L-乳酸(PLLA)/玻璃纤维(GF)复合材料等温及非等温结晶性能的影响。结合偏光显微镜(POM)观察发现,BSAD可在熔融加工中与PLLA 基体形成均相,在冷却过程中,该体系发生相分离,BSAD晶体优先从PLLA熔体中析出,诱导PLLA结晶。等温结晶动力学研究发现,随着BSAD含量提高,PLLA的Avrami指数逐渐减小,表明异相成核增强。在110℃形成的成核剂晶体尺寸较小,可在提高PLLA结晶速率的同时细化晶体尺寸,并改善PLLA/GF复合材料的拉伸、弯曲及冲击性能。

    Abstract:

    The effect of a new nucleating agent N,N′-bis(benzoyl) sebacic acid dihydrazide (BSAD) on the isothermal and non-isothermal crystallization behavior of poly(L-lactic acid) (PLLA)/glass fiber (GF) composites was studied by differential scanning calorimetry (DSC). Through the observation of the polarization optical microscopy (POM), BSAD is dissolved in PLLA matrix during the processing of the melting mixing. During the cooling process, BSAD precipitates from the matrix due to the phase separation and crystallizes prior to PLLA, then, induces PLLA to crystallize on its surface. In isothermal crystallization, Avrami index of PLLA continuously decreases with increase of BSAD content, which shows that the heterogeneous nucleation effect is gradually enhanced. At the phase separation temperature of 110 ℃, small granular crystallites of BSAD is formed, which can be used to accelerate the crystallization rate of PLLA and reduce the crystal size of PLLA, improve the tensile, bending and impact properties of PLLA/GF composites.

    参考文献
    相似文献
    引证文献
引用本文

胡玎玎,范寅清,余诸毅,颜世峰,尹静波.癸二酰二苯甲酰肼对聚L-乳酸/玻璃纤维复合材料结晶性能及力学性能的影响[J].高分子材料科学与工程,2013,29(12):57-60. Dingding Hu, Yinqing Fan, Zhuyi Yu, Shifeng Yan, Jingbo Yin. Effect of N, N′-Bis(Benzoyl) Sebacic Acid Dihydrazide on Crystallization Behavior of Poly(L-Lactic Acid)/Glass Fiber Composites[J]. Polymer Materials Science & Engineering,2013,29(12):57-60.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-12-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司