原位固相接枝改性EPDM/PP/CaCO3 复合材料相结构与性能的关系
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

福建省科技厅重大项目(2012Y4002);福建省科技厅重点项目(2008Y0036);福建省自然科学基金资助项目(2010J01276)


The Relationship Between Phase Structure and Properties in PP Composites Filled with EPDM and Surface-Modified CaCO3 by in-Situ Solid Phase Graft Copolymerization
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以丙烯酸(AA)为纽带,将聚丙烯蜡(PPW)原位固相接枝在碳酸钙(CaCO3)表面,将得到的改性CaCO3 与聚丙烯(PP)、三元乙丙橡胶(EPDM)通过2种不同的加工混合工艺制备了PP/EPDM/CaCO3 三元复合材料。研究了改性CaCO3 的表面性能,并通过热力学、动力学参数预测了复合材料中可能形成的分散形态,以阐明复合材料宏观性能与微观形态的关系。结果表明,改性CaCO3 表面极性降低,与PP、EPDM 的相容性变好,界面张力明显降低;从热力学因素考虑,改性CaCO3 更容易分散在PP相中,和EPDM 形成单独分散结构;动力学因素表明,将改性CaCO3 先与EPDM 复合、再与PP复合的两步法”工艺可以减缓CaCO3 从EPDM 中迁出而有利于形成以CaCO3 为核、EPDM 为壳的核-壳结构,这一结果通过电镜得到证实;核-壳结构使复合材料的各项力学性能均得到提高,尤其是在复合材料韧性方面,并且随着核-壳结构的增加,复合材料的韧性也随之增加,但这种核-壳结构不利于提高复合材料的熔体流动速率。

    Abstract:

    The surface of calcium carbonate (CaCO3) was grafted chemically with polypropylene wax (PPW) using acrylic acid(AA) as linkages via in-situ solid phase graft copolymerization to prepare CaCO3-AA-PPW particles. Two processing sequences (one-step and two-step mixing) were used to adjust the phase structure of PP/ ethylene- propylene-diene copolymer (EPDM)/ CaCO3-AA-PPW ternary composites. One-step mixing was that CaCO3-AA-PPW, EPDM and PP were mixed together in a twin-screw extruder to prepare ternary composites. Two-step mixing was described as follows. EPDM was mixed with CaCO3-AA-PPW in a twin-roll mill to obtain a core-shell structure with CaCO3-AA-PPW as the core and EPDM as the shell. Then the pulverized EPDM/ CaCO3-AA-PPW powder was compound with PP in a twin-screw extruder to prepare ternary composites. The possible phase structures in the ternary composites were analyzed by thermodynamics and kinetics tests. The thermodynamics parameters show that CaCO3-AA-PPW and EPDM disperses in PP easily and independently, but kinetics data indicates that two-step mixing can somehow retard the migration of CaCO3-AA-PPW from EPDM to form a core-shell structure with CaCO3-AA-PPW as the core and EPDM as the shell in PP matrix, and this structure was supported by SEM. Owing to the core-shell structure, the mechanical properties of PP/EPDM/CaCO3-AA-PPW composites improve, especially in toughness. With the increase of this structure, the toughness of composites increases but the melt flow rate decreases.

    参考文献
    相似文献
    引证文献
引用本文

朱德钦,生 瑜,邹寅将,苏晓芬.原位固相接枝改性EPDM/PP/CaCO3 复合材料相结构与性能的关系[J].高分子材料科学与工程,2013,29(12):70-76. Deqin Zhu, Yu Sheng, Yinjiang Zou, Xiaofen Su. The Relationship Between Phase Structure and Properties in PP Composites Filled with EPDM and Surface-Modified CaCO3 by in-Situ Solid Phase Graft Copolymerization[J]. Polymer Materials Science & Engineering,2013,29(12):70-76.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-12-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司