马来酸酐等离子体改性聚偏氟乙烯的表面结构及亲水时效性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Surface Structure and Hydrophilicity Timeliness of PVDF Modified by MAH Plasma
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    用马来酸酐(MAH)等离子体对聚偏氟乙烯(PVDF)表面进行接枝聚合改性。以红外光谱(FT-IR)、扫描电镜(SEM)、X射线光电子能谱(XPS)、水接触角对其表面的组成、形貌及结构进行了表征和测定分析。结果表明,MAH 等离子体放电可直接形成开环的羰基结构,时间短时,刻蚀和接枝聚合作用并存,随放电时间的延长,逐渐以接枝聚合作用为主,聚合MAH 和开环的羰基结构均增加,可形成连续的层状接枝聚合物,并趋于一个稳定值,其厚度大于10nm。PVDF表面水接触角随着放电时间的延长而迅速减小,并趋于稳定,约50°,放置30d,PVDF表面水接触角基本稳定,时效性好。

    Abstract:

    Poly(vinylidene fluoride) (PVDF) was modified with maleic anhydride (MAH) plasma through graft polymerization. The surface composition, morphology and structure of modified PVDF were characterized by SEM, FT-IR, XPS analysis; the hydrophilicity of the PVDF surface was studied by the measurement of the contact angles. The results show that the ring opening of MAH could directly form a carbonyl structure on the surface of PVDF. MAH plasma had the etching effect and the graft polymerization coexisted. The graft polymerization gradually became dominating with the plasma discharge time increasing; the amount of grafted MAH polymer and the carbonyl groups increased, a continuous graft polymer layer was formed, of which the thickness is more than 10 nm. The water contact angle of modified PVDF decreases rapidly with the time of plasma discharge increasing and keeps around 50°. It has a stable contact angle for 30 d, showing a good hydrophilicity timeliness.

    参考文献
    相似文献
    引证文献
引用本文

邵芝祥,周 清,魏无际,黄 健,吴 健.马来酸酐等离子体改性聚偏氟乙烯的表面结构及亲水时效性[J].高分子材料科学与工程,2013,29(12):94-97. Zhixiang Shao, Qing Zhou, Wuji Wei, Jian Huang, Jian Wu. Surface Structure and Hydrophilicity Timeliness of PVDF Modified by MAH Plasma[J]. Polymer Materials Science & Engineering,2013,29(12):94-97.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-12-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司