甲基丙烯酸缩水甘油酯对水溶性聚乙烯醇纤维的表面改性及增强机理
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21204046);陕西省教育厅专项项目(2010JK433,2010JK440)


Surface Modification of Water Soluble Polyvinyl Alcohol Fiber with Glycidyl Methacrylate and Its Strengthening Mechanism
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以硝酸铈铵(CAN)作为引发剂,采用甲基丙烯酸缩水甘油酯(GMA)通过悬浮接枝共聚法对水溶性聚乙烯醇(PVA)纤维进行表面改性。讨论了GMA添加量、CAN 浓度、H+ 浓度对PVA 纤维接枝率(GR)的影响,以及GR 对纸张强度的影响。研究结果表明,当GMA浓度为0.2mol/L,CAN浓度为6×10-3mol/L,H+ 浓度为0.1mol/L时,GR为35%,纸张获得较佳强度,耐折度为56次,干拉力为68.2N,湿拉力为17.8N。FT-IR表明,GMA在原纤维表面发生了接枝共聚反应。SEM 表明,改性后PVA纤维表面由槽状结构变为鳞片状结构。

    Abstract:

    Suspension grafting copolymerization was adopted to surface modification of water soluble polyvinyl alcohol (PVA) fiber with glycidyl methacrylate (GMA), using ceric ammonium nitrate (CAN) as initiator. The influence of GMA content, concentration of initiator and H+ on grafting rate (GR) of PVA fiber together with the influence of GR on paper strength was discussed. The results show that the optimum condition for a satisfactory GR is as follow: the concentration of GMA, CAN and H+ is 0.2mol/L, 6×10-3 mol/L and 0.1mol/L respectively. At this time, GR is 35%, paper gains get better strength, folding endurance is 56 times; dry tensile strength is 68.2N; wet tensile strength is 17.8N. FT-IR shows that the grafting copolymerization of GMA has taken place on the surface of PVA fiber. SEM photographs show that the surface morphology of modified PVA fiber transforms from groove structure to scaly structure.

    参考文献
    相似文献
    引证文献
引用本文

柯 勇,沈一丁,费贵强,王海花.甲基丙烯酸缩水甘油酯对水溶性聚乙烯醇纤维的表面改性及增强机理[J].高分子材料科学与工程,2013,29(12):103-106. Yong Ke, Yiding Shen, Guiqiang Fei, Haihua Wang. Surface Modification of Water Soluble Polyvinyl Alcohol Fiber with Glycidyl Methacrylate and Its Strengthening Mechanism[J]. Polymer Materials Science & Engineering,2013,29(12):103-106.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-12-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司