磺酸盐型UV 固化聚氨酯分散体的制备与表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广东省重大科技专项计划项目(2011A080802002,2012A080105011)


Preparation and Characterization of UV Cured Polyurethane Dispersions with Sulfonate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚碳酸酯二元醇、季戊四醇三丙烯酸酯、磺酸盐聚醚二元醇、异佛尔酮二异氰酸酯、环氧丙烯酸酯等原料制备了固含量约36%的磺酸盐型UV 固化聚氨酯分散体和环氧丙烯酸酯改性的UV 固化聚氨酯分散体(UV-PUDs)。研究表明,分散体的平均粒径处于68nm~290nm 之间,粒径分布多处于50nm~300nm 之间。随亲水基团含量的减少,R 值(n(-NCO)/n(-OH))的增大,环氧丙烯酸酯添加量的增多,分散体平均粒径增大,黏度减小。透射电镜(TEM)显示,分散体胶粒呈球形结构,大小不一。分散体配成涂料后,光泽度可达94,铅笔硬度可达2H,耐水性优良。添加环氧丙烯酸酯可以提高漆膜的光泽度、耐水性、硬度等性能。

    Abstract:

    UV cured polyurethane dispersions(UV-PUDs)and epoxy acrylate modified UV-PUDs with about 36% solid content were synthesized using polyether diol containing sulfonate, isophorone diisocyanate, polycarbonate diol, pentaerythritol triacrylate ,epoxy acrylate. The results show that the average particle sizes of UV-PUDs are mainly in the range of 68nm~290nm and the particle size of UV-PUDs mostly distributes in the range of 50nm~300nm. The average particle sizes increases when the content of hydrophilic group decreases, and the R value(n(-NCO)/n(-OH)) and the epoxy acrylate content increase. The viscosities of UV-PUDs decrease with the decreasing of hydrophilic group content. TEM analysis shows that the spherical shapes of the particle vary in a specific range. The glossiness and pencil hardness of film are up to 94 and 2H respectively. The resistance to water of films is also excellent. With a proper epoxy acrylate content, the glossiness, water resistance and pencil hardness are improved.

    参考文献
    相似文献
    引证文献
引用本文

邵 云,孙东成.磺酸盐型UV 固化聚氨酯分散体的制备与表征[J].高分子材料科学与工程,2013,29(12):172-175. Yun Shao, Dongcheng Sun. Preparation and Characterization of UV Cured Polyurethane Dispersions with Sulfonate[J]. Polymer Materials Science & Engineering,2013,29(12):172-175.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-12-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司