核壳型聚醋酸乙烯酯基乳胶粒形态控制研究进展
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中央高校基本科研业务费(DL12EB02-01,DL11CB04);国家自然基金(31000270,31270609);黑龙江省青年基金(QC2011C010)


Progress on the Morphological Controlling of Polyvinyl Acetate-Based Latex Particle with Core/Shell Structure
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    综述了核壳型聚醋酸乙烯酯(PVAc)基乳液乳胶粒形态控制机理的研究进展,重点评述了核壳型PVAc基乳胶粒形态控制中热力学与动力学的控制作用,并对核壳型PVAc基乳胶粒形态演变模型进行了概述。PVAc基乳胶粒的热力学性质决定其最终平衡形态,而动力学条件则决定其形态演变历程。在实际聚合反应中,核壳型PVAc基乳胶粒形态是由热力学因素和动力学因素共同决定的。核壳型PVAc基乳胶粒形态演变模型的建立有助于热力学与动力学的有机结合,为深入理解核壳型PVAc基乳胶粒形态演变及其控制提供理论依据。

    Abstract:

    The recent progress on morphological controlling mechanism of polyvinyl acetate-based (PVAc-based) latex particle with core/shell structure was reviewed. The effects of thermodynamics and kinetics on the morphological controlling of PVAc-based latex particles and the morphological evolution models of PVAc-based core/shell latex particles were mainly discussed. The final equilibrium morphology of PVAc-based latex particle was decided by the thermodynamics, and the morphological evolution of PVAc-based core/shell latex particle during polymerization was determined by the kinetics. It was pointed out that the morphology of PVAc-based latex particle under the given condition of polymerizations was controlled by the combination of thermodynamics and kinetics. The establishment of morphological evolution models of PVAc-based core/shell latex particle would contribute to the further implementation of the organic combination of thermodynamics and kinetics, and provide theoretical evidence for a deep understanding of morphological evolution and controlling of PVAc-based latex particle with a core/shell structure.

    参考文献
    相似文献
    引证文献
引用本文

李志国,白 龙,顾继友.核壳型聚醋酸乙烯酯基乳胶粒形态控制研究进展[J].高分子材料科学与工程,2013,29(12):185-190. Zhiguo Li, Long Bai, Jiyou Gu. Progress on the Morphological Controlling of Polyvinyl Acetate-Based Latex Particle with Core/Shell Structure[J]. Polymer Materials Science & Engineering,2013,29(12):185-190.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-12-06
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司