嵌段共聚物PDMAEMA-b-PS的合成及自组装行为
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51173072);江苏省普通高校研究生科研创新计划(CXZZ11_0469)资助项目


Synthesis and Self-Assembly Behaviors of Block Copolymers PDMAEMA-b-PS
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以α-氯代丙酸乙酯(ECP)为引发剂,CuCl/PMDETA为催化体系,通过原子转移自由基聚合(ATRP)法制备大分子引发剂聚甲基丙烯酸二甲胺基乙酯(PDMAEMA-Cl),进而引发第二单体苯乙烯(St)的聚合制备了不同嵌段比的双亲性嵌段共聚物PDMAEMA-b-PS。核磁共振(1H-NMR)和凝胶渗透色谱(GPC)分析表明,所得聚合物结构明确且相对分子质量及分布可控,进而使PDMAEMA-b-PS在选择性溶剂中自组装形成胶束。研究了pH 值和嵌段共聚物的链段比及温度对胶束粒径的影响,发现亲水链段长度相同的条件下,疏水链段越长或体系的pH 值较小,胶束粒径越大;同时粒径随温度的升高而减小。该胶束具有pH 温度双重响应性。

    Abstract:

    Macroinitiator poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA-Cl) was synthesized by atom transfer radical polymerization (ATRP) using ethyl-2-chloropropionate (ECP) as initiator and CuCl/PMDETA as catalyst. Then amphiphilic block copolymers PDMAEMA-b-PS with different segment ratio were synthesized. The characterization results show the polymers have an accurate structure confirmed by nuclear magnetic resonance (1H-NMR) and controllable number-average molecular weight (Mn) and polydispersity (Mw/Mn) analyzed by gel permeation chromatography (GPC). PDMAEMA-b-PS in a selective solution could self-assemble to form micelles. The effect of pH, segment ratio and temperature on the diameter of the micelles was investigated. The diameter increases with the increment of the hydrophobic chain length or the decrement of pH, and the diameter decreases with the increment of the temperature. The micelles have pH and temperature dual response.

    参考文献
    相似文献
    引证文献
引用本文

胡 娜,徐国强,李继航,施冬健,陈明清.嵌段共聚物PDMAEMA-b-PS的合成及自组装行为[J].高分子材料科学与工程,2014,30(1):36-39. Na Hu, Guoqiang Xu, Jihang Li, Dongjian Shi, Mingqing Chen. Synthesis and Self-Assembly Behaviors of Block Copolymers PDMAEMA-b-PS[J]. Polymer Materials Science & Engineering,2014,30(1):36-39.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-01-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司