交替嵌段型BAMO-AMMO 热塑性弹性体的性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21001071,21271125,21201116);河南省重大科技攻关项目资助(122102210255)


Property of BAMO-AMMO Alternative Block Thermoplastic Elastomer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以3,3′-双叠氮甲基环氧丁烷-3-叠氮甲基-3′-甲基环氧丁烷(BAMO-AMMO)三嵌段共聚物为预聚物,甲苯二异氰酸酯(TDI)和1,4-丁二醇(BDO)为扩链剂,采用溶液法合成了交替嵌段型BAMO-AMMO 热塑性弹性体,并进行了结构和相关性能的表征。结果表明,弹性体中叠氮基团与氨基甲酸酯形成氢键作用,氢键键合氨基与自由氨基的摩尔比为3.56∶1。弹性体的数均相对分子质量为30432;随着扩链剂含量(w(TDI+BDO))的增加,Tg 逐渐升高;TDI和BDO 的质量分数为20%时,Tg 为-42.14℃,拉伸强度可达9.21MPa,断裂伸长率为375%,蠕变恢复时间为200s,其最小形变值为0.1%,具有良好的抗蠕变性和蠕变恢复能力。

    Abstract:

    3,3′-Bisazidomethyl oxetane-3-azidomethyl-3′-methyl oxetane (BAMO-AMMO) alternative block thermoplastic elastomer was synthesized though solution method using BAMO-AMMO tri-block copolymer as prepolymer, toluene diisocyanate (TDI) and 1,4-butanediol (BDO) as curing agents. The structure and property were analyzed by GPC,DSC, FT-IR, rheometer and mechanical property test. The results show that azide groups form hydrogen bond with the urethane groups, the mole ratio of hydrogen bonding -NH and free -NH is 3.56∶1. The number average molecular weight of BAMO-AMMO alternative block thermoplastic elastomer is 30432; glass transition temperature (Tg) increases with the increasing of w(TDI+BDO). When w(TDI+BDO) is 20%, Tg is -42.14 ℃, tensile strength reaches 9.21 MPa, elongation at break is 375%; creep recovery time is 200s, the minimum deformation value is 0.1%, which shows BAMO-AMMO alternative block thermoplastic elastomer has an excellent creep resistance and creep recovery capacity.

    参考文献
    相似文献
    引证文献
引用本文

张 弛,李 杰,罗运军,张向飞,翟 滨.交替嵌段型BAMO-AMMO 热塑性弹性体的性能[J].高分子材料科学与工程,2014,30(1):62-65. Chi Zhang, Jie Li, Yunjun Luo, Xiangfei Zhang, Bin Zhai. Property of BAMO-AMMO Alternative Block Thermoplastic Elastomer[J]. Polymer Materials Science & Engineering,2014,30(1):62-65.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-01-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司