增容剂P(MMA-co-GMA)对PA6热稳定性及热氧化稳定性的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

吉林省青年科研基金(20130522140JH)


Effect of Compatibilizer P(MMA-co-GMA) on the Thermal and Thermo-Oxidative Stability of PA6
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用热失重分析法(TGA),研究了增容剂甲基丙烯酸甲酯(MMA)和甲基丙烯酸缩水甘油酯(GMA)共聚物P(MMA-co-GMA)的热降解行为及对尼龙6(PA6)的热稳定性和热氧化稳定性的影响。研究结果表明,在P(MMA-co-GMA)的热降解过程中能够产生含羰基、羧基、醛基或酮基等多种具有含氧基团的物质,这些产物有助于在PA6降解过程中形成对降解有自动催化作用的氢过氧化物,从而降低了PA6的热稳定性及热氧化稳定性,且二者随着增容剂用量及增容剂内GMA含量的增加而降低。

    Abstract:

    The thermal degradation behaviors of compatibilizer poly (methyl methacrylate-co-glycidyl methacrylate) (MMA-co-GMA) copolymer and its effects on the thermal and thermo-oxidative stability of nylon 6 (PA6) were investigated by thermogravimetric analyzer (TGA). The results indicate that, the addition of poly (MMA-co-GMA) copolymer damages both of the thermal and thermo-oxidative stability of PA6. The decrease of thermal and thermo-oxidative stability of PA6 is attributed to the auto-catalyzing effect of hydroperoxides on the degradation of PA6. Low molecular substances containing carbonyl, carboxyl, aldehyde or ketone groups that were produced by the degradation of poly (MMA-co-GMA) copolymer have contributed to the formation of hydroperoxides. Furthermore, with the addition amount of poly (MMA-co-GMA) copolymer or the percentage of GMA in this copolymer increasing, the thermal and thermo-oxidative stability of PA6 decrease.

    参考文献
    相似文献
    引证文献
引用本文

王文同,曹春雷,曲 淼,马剑英,张会轩.增容剂P(MMA-co-GMA)对PA6热稳定性及热氧化稳定性的影响[J].高分子材料科学与工程,2014,30(1):78-81. Wentong Wang, Chunlei Cao, Miao Qu, Jianying Ma, Huixuan Zhang. Effect of Compatibilizer P(MMA-co-GMA) on the Thermal and Thermo-Oxidative Stability of PA6[J]. Polymer Materials Science & Engineering,2014,30(1):78-81.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-01-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司