SU-8胶长细比效应的分子动力学模拟
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点基础研究发展规划项目(2011CB302101,2011CB302105);国家自然科学基金资助项目(51175056)


Molecular Dynamics Simulation of SU-8 Photoresist Slenderness Ratio Effects
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    运用分子动力学(MD)的研究方法,经过分子聚合、能量最优化和退火模拟等构建了不同长细比的SU-8光刻胶模型,模拟研究了在室温条件下不同长细比的SU-8胶纳米尺寸模型的弹性模量、泊松比、剪切模量等力学性能参数。结果表明,在室温下,随着SU-8胶模型长细比的增加,材料的杨氏模量和剪切模量逐渐增大,这一现象与微尺度SU-8胶模型的实验结果一致,表明有效长细比是微尺度下表征材料力学性能和尺寸效应的一个重要参数。

    Abstract:

    Molecular dynamic simulation was applied to build SU-8 photoresist models with different slenderness ratios by employing molecule polymerization, energy optimization and anneal simulation, and investigate mechanical properties of microscale SU-8 photoresist by calculating the elastic Modulus, Poisson’s ratio, shear modulus etc at room temperature. The results show that the elastic modulus and shear modulus of materials gradually increase with the increase of the SU-8 photoresist model slenderness ratio at room temperature. This phenomenon is consistent with experiment results of the microscale SU-8 photoresist model, which indicates that the effective slenderness ratio is an important parameter for the mechanical properties and size effect of microscale characterization.

    参考文献
    相似文献
    引证文献
引用本文

尚海鑫,褚金奎,高佳丽. SU-8胶长细比效应的分子动力学模拟[J].高分子材料科学与工程,2014,30(1):96-99. Haixin Shang, Jinkui Chu, Jiali Gao. Molecular Dynamics Simulation of SU-8 Photoresist Slenderness Ratio Effects[J]. Polymer Materials Science & Engineering,2014,30(1):96-99.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-01-07
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司